Amana Oven: error code E1 F6

Professional Repair Guide

What is this symptom?

Experiencing the E1 F6 error code on your Amana oven? This issue typically arises during heating or baking, often resulting in heating failures or incorrect temperature maintenance. Common causes include communication failures between the control board and user interface, faulty temperature sensors, or control board malfunctions. Addressing this promptly is essential to restore your oven's functionality.

Urgency: Medium

Important Tips for Amana Models

  • Official documentation for F6 E1 suggests control or associated wiring issues and recommends power reset; specific code definitions are not provided in detail by manufacturer.

Possible Causes

Communication issue between control board and user interface or oven sensor

How to Identify: Error persists after power reset, no heating, display shows E1 F6

Part: Electronic Control Board / Interface Control

Faulty oven temperature sensor or wiring

How to Identify: Error appears during use; sensor probe may be disconnected or damaged; multimeter resistance out of tolerance

Part: Oven temperature sensor probe and wiring

Control board failure

How to Identify: Error persists after reset and sensor checks; other components okay; baking function disabled

Part: Main control board (Electronic Range Control)

DIY Solutions

Power Reset of Oven Control

Easy 5–10 minutes
  1. Turn off circuit breaker or unplug the oven for at least 60 seconds
  2. Restore power and monitor if the error clears and normal operation resumes
⚠️ Safety First: Ensure power is off before touching any internal components

Inspect and Test Oven Temperature Sensor

Moderate 15–30 minutes
Tools Needed: Screwdriver, Multimeter
  1. Turn off power at breaker and open oven door
  2. Locate the oven temperature sensor (thin metal rod on back wall of oven)
  3. Disconnect sensor and measure resistance with multimeter
  4. If out of specification, replace sensor; check and secure wiring connections
⚠️ Safety First: Cut power before accessing internal components

Professional Repairs

Replace Control Board (Electronic Range Control)

Estimated Cost: $150 - $400

Repair or Replace Wiring Harness

Estimated Cost: $50 - $150

When to Call a Professional

Error persists after DIY resets and sensor checks
Internal wiring damage is suspected
Control board replacement is required

Preventive Maintenance

  • Regularly inspect and clean sensor and wiring connections: Communication errors and sensor faults that may lead to E1 F6 errors
    Frequency: annually

Frequently Asked Questions

Why is my Amana Oven Error code E1 F6?
The E1 F6 error typically indicates a communication issue between the control board and the user interface or a faulty temperature sensor.
How do I fix Amana Oven Error code E1 F6 myself?
You can perform a power reset by turning off the circuit breaker for 60 seconds or inspect and test the oven temperature sensor with a multimeter.
How much does it cost to fix Error code E1 F6?
Professional repairs for Error code E1 F6 can range from $150 to $400 for control board replacement or $50 to $150 for wiring harness repairs.
When should I call a technician for Error code E1 F6?
If DIY solutions do not resolve the issue or if you're uncomfortable performing repairs, it's best to consult a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

65%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Faulty Oven Control Board
  • Wiring Issues or Loose Connections
  • Failed Temperature Sensor

User Suggested Solutions

  1. Reset the oven by unplugging it for 5-10 minutes, then plug it back in to see if the error clears.

  2. Inspect and tighten any loose wiring connections on the control board. Ensure all connections are secure.

  3. Replace the control board if the error persists after resetting and checking connections. Follow the manufacturer's instructions for replacement.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Is it worth it to invest in repairing an Amana oven?

Community Discussions

E1 F6 error code

The issue may have been a glitch, and the user is considering changing the control board themselves if the problem recurs.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!