Fisher & Paykel Dishwasher Error F14
⚡ Quick Answer: The Fisher & Paykel dishwasher error F14 indicates a fault with the fill valve or diverter assembly, preventing the dishwasher cycle from starting. Th... ✅ DIY Fixable
What Does Error F14 Mean?
The Fisher & Paykel dishwasher error F14 indicates a fault with the fill valve or diverter assembly, preventing the dishwasher cycle from starting. This issue often manifests as the F14 code appearing on the control panel, unusual noises during the water fill stage, and the cycle may stop abruptly. A jammed or faulty diverter valve may be responsible, causing improper water routing and resulting in failure to drain.
Common Symptoms:
- F14 displayed on control panel
- Dishwasher cycle will not start or stops immediately
- Possible unusual noises at water fill stage
Possible Causes
- Faulty or jammed diverter valve/fill valve assembly (medium)
- Wiring fault to diverter or associated components (low)
- Blockage in diverter assembly preventing correct water routing (low)
How to Fix Error F14
DIY Fix Basic user checks before technician call
- Turn off the dishwasher and power at the breaker
- Check and clean the filter area and sump for visible debris
- Ensure water supply valve is open and water pressure is adequate
- Restart the dishwasher to see if error clears
Technician Only Inspect and service diverter and water inlet system
- Disconnect dishwasher from power and water supply
- Remove access panels to locate diverter valve/fill valve assembly
- Inspect diverter for mechanical jamming and clean if needed
- Test diverter motor operation and wiring continuity
- Replace diverter/fill valve assembly if faulty
Parts needed: Diverter valve assembly, Related wiring harness
- If the F14 error persists after basic user-level checks
- If unusual noises or signs of water leakage are present
Next step
Choose the next step for F14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | FP-DW-PUMP-1234 |
| voltage_rating | 240V AC |
Common Questions
What does F14 error mean on fisher & paykel dishwasher?
F14 error indicates a fault with the fill valve or diverter assembly, preventing the dishwasher cycle from starting.
Can I fix fisher & paykel dishwasher F14 error myself?
Yes, you can troubleshoot by cleaning the filter and checking the water supply before calling a technician.
How much does it cost to fix F14 error?
The estimated repair cost ranges from $80 to $250, depending on parts and labor.
When should I call a technician for F14?
Call a technician if the F14 error persists after basic checks or if you notice unusual noises or water leakage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!