Fisher & Paykel Dishwasher Error F16
⚡ Quick Answer: The Fisher & Paykel dishwasher error code F16 indicates a potential malfunction in the drain pump. Users may notice unusual noises or find that the di... ✅ DIY Fixable
What Does Error F16 Mean?
The Fisher & Paykel dishwasher error code F16 indicates a potential malfunction in the drain pump. Users may notice unusual noises or find that the dishwasher fails to drain water properly. To resolve this issue, check your specific model's user manual or the Fisher & Paykel support portal for guidance. A common first step is to power-cycle the dishwasher by turning it off at the wall or breaker for 5–10 minutes and then turning it back on.
Possible Causes
- Drain Pump Assembly
- Blocked Drain Hose
- Control Board Issue
How to Fix Error F16
DIY Fix Check for information applicable to your specific model
- Refer to your exact dishwasher model’s user manual or the official Fisher & Paykel support ‘Find a Manual’ page to locate any model‑specific error code definitions.
- Use the official Fisher & Paykel ‘Help & Support’ portal to search for F16 or contact support to get the exact meaning of F16.
- As a general first step, power‑cycle the dishwasher by turning it off at the wall or breaker for at least 5–10 minutes before powering back on (this can clear some transient faults).
- If the error persists after basic troubleshooting or if there is water leakage, unusual noises, or the dishwasher is non‑functional, contact Fisher & Paykel authorized service for diagnosis.
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 10-30 ohms |
| part_number | FP-DW-PUMP-001 |
| voltage_rating | 240V AC |
Common Questions
What does F16 error mean on Fisher & Paykel dishwasher?
F16 indicates a malfunction in the drain pump, often causing draining issues.
Can I fix Fisher & Paykel dishwasher F16 error myself?
Yes, check the user manual and try power-cycling the dishwasher.
How much does it cost to fix F16 error?
Repair costs vary by model and region; consult a technician for an estimate.
When should I call a technician for F16?
Contact a technician if the error persists after troubleshooting or if there are additional issues.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!