Fisher & Paykel Dishwasher Error F13
⚡ Quick Answer: The Fisher & Paykel dishwasher error F13 indicates a malfunction in the water softener or regeneration system, often causing the appliance to stop ope... ✅ DIY Fixable
What Does Error F13 Mean?
The Fisher & Paykel dishwasher error F13 indicates a malfunction in the water softener or regeneration system, often causing the appliance to stop operating or fail to drain. Users may notice unusual noises during cycles and the control panel displaying the F13 error code. Addressing this issue typically involves checking the water softener salt level and resetting the dishwasher.
Common Symptoms:
- Dishwasher displays F13 and may stop operation or fail to start
- Control panel shows F13 error code without completing cycle
Possible Causes
- Water softener / regeneration fault (medium)
How to Fix Error F13
DIY Fix Check water softener salt level and cap
- Locate the dishwasher’s integrated water softener salt reservoir (if your model has one).
- Open the salt cap and verify that the correct type of dishwasher salt is present and at sufficient level.
- Wipe away any salt residue around the cap to ensure proper sealing.
DIY Fix Reset the dishwasher
- Turn off the dishwasher.
- Disconnect power at the wall or breaker for 5–10 minutes.
- Reconnect power and restart a wash cycle.
Technician Only Inspect and repair water softener components
- Check the softener control valve for blockages or mechanical faults.
- Test softener system sensors and regeneration valves for proper operation.
- Replace faulty water softener valve or sensor components if needed.
Parts needed: Water softener control valve, Softener sensor or regeneration components
- If the F13 error persists after filling salt and performing reset steps
- If you are unable to access or correctly identify the water softener components
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 5-15 ohms |
| part_number | FP-DW-PUMP-01 |
| voltage_rating | 240V AC |
Common Questions
What does F13 error mean on Fisher & Paykel dishwasher?
The F13 error indicates a malfunction in the water softener or regeneration system, affecting the dishwasher's ability to drain.
Can I fix Fisher & Paykel dishwasher F13 error myself?
Yes, you can check the water softener salt level and reset the dishwasher to attempt a fix.
How much does it cost to fix F13 error?
Repair costs typically range from $100 to $350+, depending on parts and labor.
When should I call a technician for F13?
Call a technician if the F13 error persists after filling the salt or if you cannot identify the water softener components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!