Fisher & Paykel Dishwasher Error F10

⚡ Quick Answer: The Fisher & Paykel dishwasher error F10 indicates an ambient temperature or overheating fault, often leading to the unit not starting or stopping mid... ✅ DIY Fixable

What Does Error F10 Mean?

The Fisher & Paykel dishwasher error F10 indicates an ambient temperature or overheating fault, often leading to the unit not starting or stopping mid-cycle. This error may also present with unusual noises and a failure to drain water properly. To resolve this issue, check the ventilation around the dishwasher to ensure it is not overheating. Simply turning the dishwasher off and allowing it to cool for several minutes can sometimes clear the error.

Common Symptoms:

  • Unit may not start or may stop mid‑cycle when F10 is displayed (community report).

Possible Causes

  • Ambient temperature / internal overheating conditions (medium)

How to Fix Error F10

DIY Fix Check unit surroundings and reset

  1. Turn the dishwasher off at the control panel.
  2. Ensure the area around the dishwasher has adequate ventilation and is not overheated.
  3. Wait several minutes for the unit to cool.
  4. Turn the dishwasher back on and check if the F10 code clears.

Technician Only Inspect temperature sensors and airflow

  1. Disconnect power to the dishwasher at the supply.
  2. Verify the air circulation/ventilation around the dishwasher installation.
  3. Check internal temperature sensor / thermostat operation with appropriate diagnostic tools.
  4. Replace faulty temperature sensing components if verified defective.

Parts needed: Temperature sensor / thermistor, Ventilation components

🛑 When to Call a Pro:
  • If the F10 error persists after cooling and basic reset steps, especially if the dishwasher repeatedly overheats.
  • If the dishwasher exhibits signs of electrical issues or internal component faults beyond simple environmental overheating.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number FP-DP1234
voltage_rating 240V AC

Common Questions

What does F10 error mean on fisher & paykel dishwasher?

F10 indicates an ambient temperature or overheating fault, causing the dishwasher to stop mid-cycle.

Can I fix fisher & paykel dishwasher F10 error myself?

Yes, check the ventilation and reset the unit by turning it off and allowing it to cool.

How much does it cost to fix F10 error?

Repair costs range from €50 to €200+, depending on parts and labor.

When should I call a technician for F10?

Call a technician if the error persists after cooling or if you notice electrical issues.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!