Fisher & Paykel Dishwasher Error F08

⚡ Quick Answer: The Fisher & Paykel dishwasher error code F08 indicates a malfunction in the drain pump or drainage system. This issue prevents the dishwasher from dr... ✅ DIY Fixable

What Does Error F08 Mean?

The Fisher & Paykel dishwasher error code F08 indicates a malfunction in the drain pump or drainage system. This issue prevents the dishwasher from draining properly, often leaving water in the bottom after a cycle. Users may also notice unusual noises during operation, further signaling a problem with the drain cycle.

Common Symptoms:

  • Dishwasher displays error code F8 (F08) on control panel
  • Drain cycle may fail or not start
  • Water remains in the dishwasher after a cycle

Possible Causes

  • Blocked or impaired drainage (drain pump obstruction or failure) (medium)

How to Fix Error F08

DIY Fix Check and clear drain and filter

  1. Turn off and unplug the dishwasher for safety.
  2. Remove the bottom dishwasher rack and locate the filter/drain area.
  3. Clear any debris from the filter and accessible drain area.
  4. Check that the drain hose is not kinked or blocked.

Technician Only Inspect and test drain pump and related components

  1. Verify proper power and signals to the drain pump.
  2. Remove and inspect the drain pump for obstructions or mechanical failure.
  3. Test the pump electrically to confirm functionality.
  4. Replace the drain pump if necessary.

Parts needed: drain pump, drain hose, filter assembly

🛑 When to Call a Pro:
  • If drain pump and hose inspections don’t resolve the issue
  • If you’re uncomfortable accessing internal components
  • If there’s water leakage during diagnosis

Next step

Choose the next step for F08

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

$15 - $30 · Easy · 15-30 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump Assembly
resistance 10-20 ohms
part_number FP-DW-PUMP-01
voltage_rating 240V AC

Common Questions

What does F08 error mean on fisher & paykel dishwasher?

F08 error signifies a malfunction in the drain pump or drainage system, preventing proper drainage.

Can I fix fisher & paykel dishwasher F08 error myself?

Yes, you can check and clear the drain and filter to potentially resolve the F08 error.

How much does it cost to fix F08 error?

Repair costs vary based on part prices and labor, but it is generally considered medium.

When should I call a technician for F08?

Call a technician if the issue persists after checking the drain pump and hose, or if you're uncomfortable accessing internal components.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!