Fisher & Paykel Dishwasher Error F07
⚡ Quick Answer: The Fisher & Paykel dishwasher error code F07 indicates a malfunction in the drain pump, which may present as a humming sound and an inability to drai... ✅ DIY Fixable
What Does Error F07 Mean?
The Fisher & Paykel dishwasher error code F07 indicates a malfunction in the drain pump, which may present as a humming sound and an inability to drain water effectively. Additionally, this error could point to a potential issue with the heating element, impacting the dishwasher's ability to heat water and complete its cycle. Proper troubleshooting is essential to identify the exact cause.
Common Symptoms:
- Error code F07 displayed on dishwasher control panel
- Possible inability to heat water or complete cycle
Possible Causes
- Possible heating element issue (low)
How to Fix Error F07
DIY Fix Basic checks and reset
- Turn off and disconnect the dishwasher from power for several minutes
- Check that the water supply is connected and hot water is available
- Restart the dishwasher and see if error returns
Technician Only Inspect heating element and associated circuitry
- Disconnect power to dishwasher
- Access dishwasher internal components per service manual
- Test heating element continuity and operation with appropriate tools
- Inspect wiring and control board related to heating subsystem
- Replace defective heating element or wiring as needed
Parts needed: heating element, wiring harness, possibly control board
- If you are not experienced with dishwasher electrical components
- If the error persists after basic user troubleshooting
Next step
Choose the next step for F07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | FP-DW-PUMP-001 |
| voltage_rating | 240V AC |
Common Questions
What does F07 error mean on fisher & paykel dishwasher?
F07 indicates a drain pump malfunction, often with humming and draining issues.
Can I fix fisher & paykel dishwasher F07 error myself?
Yes, try resetting the dishwasher and checking the water supply before calling a technician.
How much does it cost to fix F07 error?
Repair costs typically range from $100 to $300+, depending on parts and labor.
When should I call a technician for F07?
Call a technician if you're not experienced with electrical components or if the error persists after basic troubleshooting.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!