Fisher & Paykel Dishwasher Error F06

⚡ Quick Answer: The Fisher & Paykel dishwasher error code F06 indicates a malfunction in the drying fan, which can lead to poor drying performance or complete failure... ✅ DIY Fixable

What Does Error F06 Mean?

The Fisher & Paykel dishwasher error code F06 indicates a malfunction in the drying fan, which can lead to poor drying performance or complete failure of the drying cycle. Users may notice the dishwasher stopping mid-cycle, continuous beeping, or the need for a reset. This issue typically arises due to a malfunction or failure of the drying fan assembly.

Common Symptoms:

  • Dishwasher stops mid‑cycle and displays F06 on the control panel
  • Drying cycle fails or drying performance is poor
  • Continuous beeping or fault indication requiring reset or service

Possible Causes

  • Drying fan malfunction or failure (high)

How to Fix Error F06

DIY Fix Restart and basic checks

  1. Turn off the dishwasher and unplug it from power or switch off at wall
  2. Wait for 1–2 minutes to allow internal electronics to reset
  3. Ensure no obstructions at the air vent or filter areas that could restrict airflow
  4. Restore power and restart a short cycle to check if error persists

Technician Only Inspect and replace drying fan assembly

  1. Disconnect dishwasher from power and water supply at the breaker or wall outlet
  2. Remove access panels to reach the drying fan and duct area
  3. Visually inspect the drying fan for signs of damage, obstruction, or burn marks
  4. Measure fan motor continuity with a multimeter to confirm failure
  5. Replace the drying fan assembly if defective and test operation

Parts needed: Drying fan motor, Fan housing or duct components, Associated wiring harness/connectors

🛑 When to Call a Pro:
  • If resetting and basic checks do not clear the F06 error code
  • If the drying fan shows physical damage or does not spin when tested
  • If the error is accompanied by other codes or signs of electrical issues

Technical Specifications

wattage 50W
component Drain Pump Assembly
resistance 10-30 ohms
part_number FP-DW-PUMP-001
voltage_rating 240V AC

Common Questions

What does F06 error mean on fisher & paykel dishwasher?

F06 indicates a drying fan malfunction, leading to poor drying performance or the dishwasher stopping mid-cycle.

Can I fix fisher & paykel dishwasher F06 error myself?

Yes, you can try restarting the dishwasher and checking for obstructions in the air vent or filter areas.

How much does it cost to fix F06 error?

Repair costs for the F06 error typically range from ¥8,000 to ¥25,000, depending on parts and labor.

When should I call a technician for F06?

Call a technician if basic troubleshooting doesn't clear the error or if there is physical damage to the drying fan.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!