Fisher & Paykel Dishwasher Error F02

⚡ Quick Answer: The F02 error code on a Fisher & Paykel dishwasher indicates a drain pump failure, often due to a motor rotor fault or an obstruction near the wash pu... ✅ DIY Fixable

What Does Error F02 Mean?

The F02 error code on a Fisher & Paykel dishwasher indicates a drain pump failure, often due to a motor rotor fault or an obstruction near the wash pump. Symptoms include the dishwasher displaying the error, unusual noises during operation, and a failure to drain water properly. Basic troubleshooting involves resetting the appliance, but persistent issues may require professional inspection and repair of the wash motor or pump.

Common Symptoms:

  • Dishwasher displays F2/F02 and beeps
  • Wash cycle stops or will not start
  • Dishwasher may not drain or pump water
  • Possible unusual noise from motor or pump

Possible Causes

  • Motor rotor fault or wash motor issue (medium)
  • Obstruction near wash pump/motor area (medium)

How to Fix Error F02

DIY Fix Basic Checks and Reset

  1. Turn off the dishwasher and disconnect power at the wall or circuit breaker
  2. Wait a few moments and restore power to reset the control (soft reset)
  3. Observe if the error clears

Technician Only Inspect and Repair Motor Rotor / Wash Pump

  1. Disconnect power and water supply
  2. Remove bottom spray arm and filter area to inspect for debris or obstruction
  3. Check wash motor rotor for free spinning; replace if seized or damaged
  4. Inspect wiring connections to motor and control
  5. Reassemble and test operational cycle

Parts needed: Wash motor rotor or complete wash pump assembly, Associated wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after basic reset and user-level debris checks
  • If there are signs of internal water leakage or electrical issues

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number FP-DW-PUMP-01
voltage_rating 120V AC

Common Questions

What does F02 error mean on fisher & paykel dishwasher?

The F02 error indicates a drain pump failure, often linked to a motor rotor fault or obstruction near the wash pump.

Can I fix fisher & paykel dishwasher F02 error myself?

Yes, you can attempt a basic reset by turning off the dishwasher, disconnecting power, and then restoring it.

How much does it cost to fix F02 error?

The estimated repair cost for the F02 error ranges from $150 to $400+, depending on the parts and labor required.

When should I call a technician for F02?

Call a technician if the error persists after a basic reset or if you notice signs of internal leakage or electrical issues.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!