Electrolux Oven Error F91
⚡ Quick Answer: The Electrolux oven error F91 indicates a malfunction with the door lock mechanism. This error typically occurs during a self-clean cycle or when atte... ✅ DIY Fixable
What Does Error F91 Mean?
The Electrolux oven error F91 indicates a malfunction with the door lock mechanism. This error typically occurs during a self-clean cycle or when attempting to lock the oven, resulting in the oven door failing to latch properly. Common causes include a misalignment of the door lock or a faulty door lock motor. Visual inspections and basic power resets can sometimes resolve the issue.
Common Symptoms:
- Oven displays "F91" on the control panel
- Oven door does not lock properly or fails to latch
- Error often occurs when initiating a self‑clean cycle or when attempting to lock the oven
Possible Causes
- Door lock not reaching locked position due to mechanical obstruction or misalignment (medium)
- Faulty door lock motor or lock switch (medium)
How to Fix Error F91
DIY Fix Basic Power Reset and Visual Inspection
- Turn off the oven at the mains or breaker and disconnect for about 30–60 seconds.
- Reconnect power and observe if the F91 code clears and the door operates normally.
- Visually inspect the door latch area for obvious debris, bent metal, or obstructions preventing full closure.
Technician Only Inspect and Repair Door Lock Assembly
- Remove the oven door or access the lock assembly with power disconnected.
- Inspect and test the door lock motor and door lock position switches for proper function.
- Check mechanical alignment of latch and adjust if necessary.
- Replace defective motor or switches, reassemble and test operation.
Parts needed: Door lock motor assembly, Door lock position switches, Door latch hardware
- If the F91 error persists after basic power reset and visual inspection
- If the oven door lock mechanism is inaccessible or if internal electrical testing is required
Next step
Choose the next step for F91
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | 318255100 |
| voltage_rating | 240V AC |
Common Questions
What does F91 error mean on Electrolux oven?
F91 indicates a door lock malfunction, preventing the oven from latching and heating properly.
Can I fix Electrolux oven F91 error myself?
Yes, you can try a power reset and visually inspect the door latch for obstructions.
How much does it cost to fix F91 error?
Estimated repair costs range from $80 to $250, depending on parts needed.
When should I call a technician for F91?
Call a technician if the error persists after a reset or if the lock mechanism is inaccessible.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!