Electrolux Oven Error E01

⚡ Quick Answer: The Electrolux oven error code E01 typically indicates a malfunction in the control board, leading to an unresponsive display or erratic behavior. If ... ✅ DIY Fixable

What Does Error E01 Mean?

The Electrolux oven error code E01 typically indicates a malfunction in the control board, leading to an unresponsive display or erratic behavior. If your oven shows this error, it may become non-operational. Basic troubleshooting steps include power cycling the oven and ensuring the door is properly latched. If the issue persists, further diagnosis may be needed to identify faults in the control board or related components.

Common Symptoms:

  • Display shows E01 and oven becomes non‑operational (inferred based on general appliance behavior)

Possible Causes

  • Control Board

How to Fix Error E01

DIY Fix Basic checks

  1. Turn the oven off and disconnect power at the breaker or unplug.
  2. Wait at least 30 seconds, then restore power to see if the error clears.
  3. Check that the oven door is fully closed and latched, and that no obvious debris is blocking mechanisms.
  4. Review your specific oven model’s user manual for any listed errors and resets.

Technician Only Diagnostic service

  1. Use service diagnostic mode (if available for your model) to check for stored faults in the control board.
  2. Inspect user interface/control board and associated wiring for faults.
  3. Test oven sensors and control board communication with appropriate diagnostic tools.

Parts needed: Control/display interface board, Internal wiring harness, Sensors (if diagnostic indicates fault)

🛑 When to Call a Pro:
  • If error E01 persists after power reset and basic checks
  • If any internal components appear damaged or wiring is loose or burnt
  • If the oven remains entirely non‑responsive when powered on

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number 5304500464
voltage_rating 120V AC

Common Questions

What does E01 error mean on Electrolux oven?

E01 indicates a control board malfunction, causing the oven to be non-operational.

Can I fix Electrolux oven E01 error myself?

Yes, you can perform basic checks like power cycling the oven and ensuring the door is closed.

How much does it cost to fix E01 error?

Repair costs range from $100 to $300+, depending on the inspection and parts needed.

When should I call a technician for E01?

Call a technician if the error persists after basic checks or if you notice damaged components.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!