Electrolux Oven Error F41

⚡ Quick Answer: The Electrolux oven error code F41 indicates a lock-out condition of the cooktop control system, often resulting in a non-responsive oven or range. Th... ✅ DIY Fixable

What Does Error F41 Mean?

The Electrolux oven error code F41 indicates a lock-out condition of the cooktop control system, often resulting in a non-responsive oven or range. This can stem from a communication fault between the oven control and motorized components, leading to erratic temperature readings or complete failure to heat. It's crucial to address this issue promptly to restore normal operation.

Common Symptoms:

  • Display shows F41 and appliance may not respond to commands
  • Oven or range cooktop functions are locked out or non‑responsive

Possible Causes

  • Cooktop lock‑out state detected by control system (medium)
  • Communication error between oven control and motorized components (low)

How to Fix Error F41

DIY Fix Perform basic reset and check lock‑out

  1. Turn oven off at the mains or unplug the unit
  2. Wait 30–60 seconds
  3. Restore power and check if F41 clears
  4. If applicable, cancel cooktop lock by pressing/off holding per model instructions

Technician Only Inspect control and communication circuits

  1. Disconnect power and remove access panels
  2. Check wiring harnesses between oven control and motorized components
  3. Test continuity and connections of motorized dampers or door lock assemblies
  4. If communication fault persists, consider control board diagnostic and replacement

Parts needed: Oven control board, Wiring harnesses, Motorized components (door lock/damper)

🛑 When to Call a Pro:
  • Error persists after power reset and basic lock‑out cancellation
  • Signs of electrical damage, burning smell, or repeated lock‑outs

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number 5304502020
voltage_rating 120V AC

Common Questions

What does F41 error mean on Electrolux oven?

F41 indicates a lock-out condition or a communication error within the oven control system.

Can I fix Electrolux oven F41 error myself?

Yes, try performing a basic reset by turning off the oven and restoring power after 30-60 seconds.

How much does it cost to fix F41 error?

Repair costs for the F41 error can range from $150 to $500+, depending on parts and labor.

When should I call a technician for F41?

Call a technician if the error persists after a reset or if you notice signs of electrical damage.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!