Electrolux Oven Error F3
⚡ Quick Answer: The Electrolux oven F3 error indicates a malfunction in the temperature sensor, often leading to inaccurate temperature readings or the oven not heati... ✅ DIY Fixable
What Does Error F3 Mean?
The Electrolux oven F3 error indicates a malfunction in the temperature sensor, often leading to inaccurate temperature readings or the oven not heating properly. This may result from a faulty temperature sensor, broken wiring, or a loose connection between the sensor and the control board. If the oven displays F3 when started, it may fail to heat or shut down shortly after, making it crucial to address this issue promptly.
Common Symptoms:
- Display shows F3 when oven is started
- Oven fails to heat or shuts down shortly after starting
- Inaccurate or no temperature regulation
Possible Causes
- Faulty oven temperature sensor (RTD) (medium)
- Open/broken wiring or loose connector between sensor and control board (medium)
- Control board input circuit failure (low)
How to Fix Error F3
DIY Fix Basic Reset and Visual Checks
- Turn off the oven and disconnect power at breaker or unplug
- Wait at least 30 seconds and restore power to see if error clears
- Visually inspect the oven temperature sensor and its wiring connectors for obvious damage or looseness
Technician Only Test and Replace Temperature Sensor Circuit
- Disconnect oven from power and access the oven temperature sensor (typically mounted on rear oven wall)
- Test sensor resistance with a multimeter; open or infinite resistance indicates failure
- Inspect and test wiring harness continuity between sensor and control board
- Replace faulty sensor or repair wiring as needed
Parts needed: Oven temperature sensor (RTD), Wiring harness/connectors
- If error persists after basic resets and visual checks
- If sensor resistance tests are within spec but error remains
- If control board or internal wiring issues are suspected
Next step
Choose the next step for F3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F3 error mean on Electrolux oven?
F3 error indicates a malfunction in the temperature sensor, causing heating issues.
Can I fix Electrolux oven F3 error myself?
Yes, you can perform basic resets and visual checks of the temperature sensor.
How much does it cost to fix F3 error?
The estimated repair cost for the F3 error ranges from $50 to $200.
When should I call a technician for F3?
Call a technician if the error persists after resets or if there are suspected control board issues.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!