Electrolux Oven Error F13
⚡ Quick Answer: The Electrolux oven error code F13 signifies an internal control system error, specifically a checksum or data verification failure within the oven’s ... ✅ DIY Fixable
What Does Error F13 Mean?
The Electrolux oven error code F13 signifies an internal control system error, specifically a checksum or data verification failure within the oven’s control electronics. This can lead to the oven being non-operational, displaying the error immediately upon power-up or after use. If the error persists, it indicates that further inspection and potential replacement of the control board may be necessary.
Common Symptoms:
- Oven is non‑operational when F13 is displayed
- Error appears immediately on power‑up or after attempted use
- Error persists after normal use or self‑diagnostics
Possible Causes
- Control board internal checksum/data verification failure (high)
How to Fix Error F13
DIY Fix Power reset the oven
- Turn off oven at mains or unplug from power outlet
- Wait at least 30 seconds
- Restore power and attempt to use the oven
Technician Only Inspect and replace control electronics
- Verify persistent F13 error after power reset
- Disconnect power and access control board
- Inspect for burn marks, loose connections, or failed EEPROM components
- Replace the faulty control/display board with model‑specific part
Parts needed: Oven control/display board
- If error persists after power reset
- If you are unsure about identifying control board faults safely
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1,000-1,200 ohms |
| part_number | 5304501766 |
| voltage_rating | 120V AC |
Common Questions
What does F13 error mean on electrolux oven?
F13 indicates an internal control error related to data verification, making the oven non-operational.
Can I fix electrolux oven F13 error myself?
Yes, you can attempt a power reset by turning off the oven, waiting 30 seconds, and restoring power.
How much does it cost to fix F13 error?
Repair costs for the F13 error typically range from $150 to $400+, depending on the model and region.
When should I call a technician for F13?
Call a technician if the error persists after a power reset or if you're unsure about safely identifying control board issues.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!