Electrolux Oven Error F04

⚡ Quick Answer: The Electrolux oven error code F04 indicates a malfunction in the heating element, often linked to an issue with the oven control system. This may man... ✅ DIY Fixable

What Does Error F04 Mean?

The Electrolux oven error code F04 indicates a malfunction in the heating element, often linked to an issue with the oven control system. This may manifest as the oven not heating or becoming unresponsive, and is commonly related to a faulty temperature sensor or touch panel. If you encounter this error, it's essential to check the sensor and control panel circuitry, as these components may require diagnosis and potential replacement.

Common Symptoms:

  • Display shows F04 and oven may cease heating or become unresponsive
  • The error can appear during normal operation or after power interruptions

Possible Causes

  • Oven temperature sensor out of range (medium)
  • Touch panel or control interface fault (medium)

How to Fix Error F04

DIY Fix Basic Reset and Check

  1. Turn the oven off at the mains power switch or circuit breaker.
  2. Wait 1–5 minutes to allow the control board to fully power down.
  3. Turn the mains power back on and see if the F04 error clears.
  4. Ensure the touch panel is clean and dry; try using buttons to clear the code.

Technician Only Diagnose Sensor and Control Panel Circuitry

  1. Use appropriate service documentation for the specific Electrolux model.
  2. Check the resistance and behavior of the oven’s temperature sensor against specifications.
  3. Inspect wiring harnesses and connections between the touch panel and main control board for damage or loose connections.
  4. Replace the oven touch panel or main control board if found defective.
  5. Verify system operation after repairs.

Parts needed: Temperature sensor (thermistor/RTD), Touch panel assembly, Main control board, Wiring harness connectors

🛑 When to Call a Pro:
  • If the error persists after power reset and basic checks
  • If the oven is unresponsive or shows unpredictable operation

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number 318255100
voltage_rating 240V AC

Common Questions

What does F04 error mean on Electrolux oven?

The F04 error indicates a malfunction in the heating element, often related to the oven control system.

Can I fix Electrolux oven F04 error myself?

Yes, you can try a basic reset by turning the oven off for 1–5 minutes and then back on.

How much does it cost to fix F04 error?

Repair costs for the F04 error typically range from $100 to $350+, depending on parts and labor.

When should I call a technician for F04?

Call a technician if the error persists after a reset or if the oven remains unresponsive.

Sources & References

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!