Electrolux Oven Error E13
⚡ Quick Answer: The Electrolux oven error code E13 typically indicates a malfunction related to the control interface or the temperature sensor. This can lead to the ... ✅ DIY Fixable
What Does Error E13 Mean?
The Electrolux oven error code E13 typically indicates a malfunction related to the control interface or the temperature sensor. This can lead to the oven not heating properly or displaying inconsistent temperatures. Users may notice the E13 code on the control panel, accompanied by beeping or disruptions in normal operation. Addressing this issue may involve resetting the oven and checking for any visible damage to the control panel.
Common Symptoms:
- Error code E13 displayed on the oven/range control panel
- Possible beeping or disruption in normal oven operation
Possible Causes
- User interface/control board internal failure (low)
- Temperature sensor or related wiring issue (community report) (low)
How to Fix Error E13
DIY Fix Basic reset and visual check
- Turn off and disconnect the oven from its power source for at least 30 seconds.
- Reconnect power and see if the E13 code clears.
- Visually inspect the control panel buttons for sticking or damage.
- Ensure the oven door is fully closed and latched.
Technician Only Diagnose control board and sensor circuits
- Place the oven into service/diagnostic mode if available for your model to read fault history.
- Test the oven temperature sensor resistance and wiring harness continuity.
- Inspect the User Interface Board (UIB) and main control board for signs of failure or damage.
- Replace faulty control electronics or sensor assemblies as required.
Parts needed: Temperature sensor/probe, User Interface Board (UIB), Main control board, Wiring harness connectors
- If the error persists after power reset and basic checks
- If there are signs of electrical burning, smoke, or unusual noises
- If internal diagnostics point to control board faults
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | ELECTROLUX 318255201 |
| voltage_rating | 240V AC |
Common Questions
What does E13 error mean on Electrolux oven?
E13 indicates a control interface or temperature sensor malfunction, leading to heating issues.
Can I fix Electrolux oven E13 error myself?
Yes, you can try resetting the oven and checking the control panel for damage.
How much does it cost to fix E13 error?
Repair costs vary by region and parts, typically involving moderate to high expenses for control boards.
When should I call a technician for E13?
Call a technician if the error persists after resetting, or if you notice burning smells or unusual noises.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!