Electrolux Dryer Error E60
⚡ Quick Answer: The Electrolux Dryer error E60 indicates a heating system fault, causing the dryer to run without producing heat. This issue is often linked to a malf... ✅ DIY Fixable
What Does Error E60 Mean?
The Electrolux Dryer error E60 indicates a heating system fault, causing the dryer to run without producing heat. This issue is often linked to a malfunction in the heating element or the heating circuit, resulting in cold air inside the drum after approximately 30 minutes of operation. If you see the E60 error code on the control panel, it is crucial to address the heating system to restore proper function.
Common Symptoms:
- Dryer runs but does not heat
- Cold air inside drum after ~30 minutes of drying
- E60 displayed on control panel
Possible Causes
- General heating system fault (heater assembly failure) (medium)
How to Fix Error E60
DIY Fix Check basic airflow and lint filter
- Turn off and unplug the dryer.
- Remove and clean the lint filter.
- Check the exhaust hose and vent for bends, restrictions, or blockages.
- Ensure the dryer is properly installed with clear ventilation.
Technician Only Diagnose and repair heating system
- Disconnect power and access the dryer’s internal heating compartment.
- Test the heating element, thermostats, thermal fuses, and related wiring for continuity.
- Replace any defective heating component (e.g., heating element or thermostat).
- Reassemble and test the dryer for proper heat output.
Parts needed: Heating element / heater assembly, Thermostats / thermal cut-offs, Wiring harnesses
- If the dryer continues to show E60 and does not heat after cleaning lint and vents
- If you are not experienced with electrical appliance repair
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | 134503600 |
| voltage_rating | 240V AC |
Common Questions
What does E60 error mean on Electrolux Dryer?
E60 indicates a heating system fault, preventing the dryer from producing heat.
Can I fix Electrolux Dryer E60 error myself?
Yes, check airflow, clean the lint filter, and inspect exhaust hoses for blockages.
How much does it cost to fix E60 error?
Repair costs range from moderate to high, depending on the faulty component.
When should I call a technician for E60?
Call a technician if E60 persists after cleaning vents or if you're inexperienced with repairs.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!