Electrolux Dryer Error E32

⚡ Quick Answer: The Electrolux Dryer error E32 indicates a malfunction in the moisture sensor circuit, often resulting in the dryer failing to heat properly or stoppi... ✅ DIY Fixable

What Does Error E32 Mean?

The Electrolux Dryer error E32 indicates a malfunction in the moisture sensor circuit, often resulting in the dryer failing to heat properly or stopping mid-cycle. This error suggests that the moisture sensor feedback frequency is too low, potentially due to dirty sensor bars, damaged wiring, or a faulty moisture sensor assembly. Addressing these issues can restore proper functioning and temperature consistency.

Common Symptoms:

  • E32 displayed on control panel
  • Dryer stops mid‑cycle
  • Dryer may not start in automatic moisture sensing modes

Possible Causes

  • Dirty or coated moisture sensor bars (medium)
  • Damaged moisture sensor wiring or connection failure (medium)
  • Faulty moisture sensor assembly (medium)

How to Fix Error E32

DIY Fix Clean moisture sensor bars

  1. Disconnect dryer power
  2. Locate moisture sensor bars inside the dryer drum (usually near lint filter)
  3. Clean the bars thoroughly with rubbing alcohol and a soft cloth
  4. Run a test cycle to see if the error clears

Technician Only Inspect and repair moisture sensor circuit

  1. Disconnect dryer power
  2. Remove access panels to reach moisture sensor wiring and assembly
  3. Inspect wiring harness and connectors for damage or loose connections
  4. Test continuity of moisture sensor and wiring using a multimeter
  5. Replace moisture sensor assembly and/or wiring harness if defective
  6. Verify correct operation and clear error codes

Parts needed: Moisture sensor assembly, Sensor wiring harness

🛑 When to Call a Pro:
  • If moisture sensor circuit actions do not clear the error
  • If internal wiring or control board issues are suspected
  • If you are not comfortable performing internal electrical diagnostics

Technical Specifications

wattage N/A
component Thermistor
resistance 10k-15k ohms
part_number 5304502025
voltage_rating 120V AC

Common Questions

What does E32 error mean on Electrolux Dryer?

E32 indicates a moisture sensor circuit malfunction, causing heating issues and mid-cycle stops.

Can I fix Electrolux Dryer E32 error myself?

Yes, you can clean the moisture sensor bars with rubbing alcohol and a soft cloth.

How much does it cost to fix E32 error?

Repair costs range from $30 to $120 for parts, excluding labor.

When should I call a technician for E32?

Call a technician if cleaning the sensors doesn't resolve the issue or if internal wiring problems are suspected.

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!