Electrolux Dryer Error E24

⚡ Quick Answer: The Electrolux dryer error E24 indicates an airflow restriction, often linked to a faulty NTC temperature sensor affecting the heating and temperature... ✅ DIY Fixable

What Does Error E24 Mean?

The Electrolux dryer error E24 indicates an airflow restriction, often linked to a faulty NTC temperature sensor affecting the heating and temperature monitoring system. This may result in inadequate heating, reduced drying performance, and unusual sounds. Addressing this issue typically involves checking for blockages in the lint filter and exhaust vent, as well as examining the temperature sensor and its wiring for any faults.

Common Symptoms:

  • Dryer displays E24 on control panel
  • Dryer may not heat properly or stops heating

Possible Causes

  • Faulty or out‑of‑spec NTC temperature sensor (exhaust or drum) (medium)
  • Loose, corroded, or damaged wiring/connector for the temperature sensor (medium)

How to Fix Error E24

DIY Fix Basic Checks Before Technician Visit

  1. Turn off and unplug the dryer.
  2. Check that the lint filter is clean and the exhaust vent/duct is free from blockages (improves airflow and prevents false sensor triggers).
  3. Restart the dryer to see if the error persists after basic checks.

Technician Only Inspect and Test Temperature Sensor and Wiring

  1. Disconnect power and remove appropriate panels to access the NTC temperature sensor(s) (commonly on the exhaust duct or heater housing).
  2. Visually inspect the sensor wiring harness and connectors for corrosion, damage, or looseness.
  3. Use a multimeter to measure the sensor resistance at room temperature and compare to expected specifications for the model.
  4. Replace the NTC temperature sensor if open/shorted or out of specification.
  5. Repair or replace damaged wiring/connectors as necessary.

Parts needed: NTC temperature sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after sensor and wiring checks
  • If there are signs of electrical damage or safety concerns
  • If sensor replacement does not clear the error

Technical Specifications

wattage 100W
component Blower Motor
resistance 5-15 ohms
part_number 5304502026
voltage_rating 240V AC

Common Questions

What does E24 error mean on Electrolux dryer?

E24 indicates an airflow restriction due to a fault with the NTC temperature sensor, affecting drying efficiency.

Can I fix Electrolux dryer E24 error myself?

Yes, you can perform basic checks like cleaning the lint filter and inspecting the exhaust vent for blockages.

How much does it cost to fix E24 error?

Repair costs range from $30 to $120 for parts, plus labor depending on service rates.

When should I call a technician for E24?

Call a technician if the error persists after checks, if you notice electrical damage, or if sensor replacement doesn't resolve the issue.

Data last verified: 2026-01-29

User Comments (0)

Share your experience or solution below.

Be the first to comment!