Electrolux Dryer Error B2
⚡ Quick Answer: The Electrolux Dryer B2 error code indicates a power supply issue, often due to voltage problems or incorrect wiring, leading to no heat during drying... ✅ DIY Fixable
What Does Error B2 Mean?
The Electrolux Dryer B2 error code indicates a power supply issue, often due to voltage problems or incorrect wiring, leading to no heat during drying cycles. This may cause the dryer to fail to start or stop shortly after starting. Ensure your dryer is connected to a properly grounded outlet and that the voltage is within specifications.
Common Symptoms:
- Dryer displays B2 on control panel at startup or during operation
- Dryer may not start or may stop shortly after starting
Possible Causes
- Power supply issue (voltage out of acceptable range) (high)
- Incorrect power connection or improper outlet wiring (medium)
How to Fix Error B2
DIY Fix Check dryer power supply
- Ensure the dryer is plugged into a properly grounded outlet
- Check that the voltage at the outlet is within the specification for your dryer (typically ~230V in many regions, confirm for your model)
- Try connecting the dryer to a different properly rated outlet if safe to do so
Technician Only Verify electrical supply and control board
- Measure line voltage at the dryer’s terminal block to confirm stable, correct voltage
- Inspect wiring at the terminal block and outlet for loose or damaged connections
- If supply is confirmed good and stable, test control board voltage regulation circuitry for faults
- Replace main control board if found defective
Parts needed: multimeter for voltage measurement, control board (if defective), terminal block wiring
- If voltage measurements cannot be performed safely
- If voltage is correct but error persists after basic checks
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | 5304517891 |
| voltage_rating | 240V AC |
Common Questions
What does B2 error mean on Electrolux Dryer?
The B2 error indicates a power supply issue, often leading to no heat during the drying cycle.
Can I fix Electrolux Dryer B2 error myself?
Yes, check the power supply and ensure it's plugged into a properly grounded outlet.
How much does it cost to fix B2 error?
Repair costs range from $100 to $400+, depending on the need for control board replacement.
When should I call a technician for B2?
Call a technician if you cannot safely measure voltage or if the error persists after basic checks.
Sources & References
- Laundry Dryer Error Code Guide - Electrolux (official)
Data last verified: 2026-01-29
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!