Dishlex Dishwasher Error iD0
⚡ Quick Answer: The iD0 error code on a Dishlex dishwasher typically indicates a drainage issue, which may manifest as unusual sounds during operation and a failure t... ✅ DIY Fixable
What Does Error iD0 Mean?
The iD0 error code on a Dishlex dishwasher typically indicates a drainage issue, which may manifest as unusual sounds during operation and a failure to complete wash cycles. This could be related to a motor speed sensor fault or a problem with the drainage system. If this error occurs, it's important to check the door latch and ensure proper functionality of the appliance.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Clogged Filter
How to Fix Error iD0
DIY Fix Check basic operation and consult manual/support
- Turn the dishwasher off and back on to clear transient faults.
- Ensure the door is fully closed and latched correctly.
- Consult the specific model’s manual for any listed error codes.
- If no meaningful information is in the manual, contact Dishlex support for code interpretation.
Technician Only Diagnose electrical/motor sensor circuits
- With power off, inspect wiring to wash motor and sensor circuits for damage or loose connections.
- Use service diagnostics to check motor tachometer signals if accessible.
- Verify control board operations and replace faulty components as confirmed by measurements.
Parts needed: motor/tachometer sensor wiring, control board
- If error persists after power cycle and basic checks.
- If any internal wiring appears burnt, damaged, or wet.
- If you cannot locate specific error code documentation for your model.
Next step
Choose the next step for iD0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does iD0 error mean on dishlex dishwasher?
The iD0 error indicates a drainage issue, often accompanied by unusual sounds and incomplete cycles.
Can I fix dishlex dishwasher iD0 error myself?
Yes, you can try basic checks like power cycling the dishwasher and ensuring the door is properly closed.
How much does it cost to fix iD0 error?
Repairs for the iD0 error can range from ¥10,000 to ¥50,000+ depending on parts and labor.
When should I call a technician for iD0?
Call a technician if the error persists after basic checks or if you notice any burnt or damaged wiring.
Sources & References
- Dishlex Dishwasher Troubleshooting Support (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!