Dishlex Dishwasher Error i30
⚡ Quick Answer: The Dishlex dishwasher error i30 indicates a water leakage detection issue. This error is triggered when the internal leak detection system identifies... ✅ DIY Fixable
What Does Error i30 Mean?
The Dishlex dishwasher error i30 indicates a water leakage detection issue. This error is triggered when the internal leak detection system identifies water in the base of the appliance, often resulting in a continuous beeping sound and flashing display lights. Common causes include internal water leaks, excessive foam from detergents, or blocked spray arms leading to misdirected water. To address this issue, basic checks for standing water can be performed before calling a technician.
Common Symptoms:
- Dishwasher stops mid‑cycle when error appears
- Water detected in bottom tray or base
- Continuous draining or cycling as safety response
- Possible beeps/flashing pattern associated with error
Possible Causes
- Internal water leak detected in base/flood tray (medium)
- Excessive foam/over‑sudsing leading to water in base (medium)
- Blocked spray arms or improper loading causing misdirected spray and leakage (medium)
How to Fix Error i30
DIY Fix Basic Leak and Foam Checks
- Turn off the dishwasher and disconnect power at the mains.
- Shut off the water supply to the appliance.
- Check the bottom of the dishwasher interior and base area for any standing water; if present, carefully remove/dry it with towels.
- Ensure you are using the correct detergent and the proper amount to avoid excessive suds.
- Inspect spray arms for free rotation and correct loading to avoid deflected water spray.
Technician Only Service Technician Leak Investigation
- Drain and dry the base area to confirm whether water accumulation is causing the fault.
- Remove lower panels to inspect the flood tray and flood switch/sensor for signs of water ingress.
- Inspect and test door seals, hoses, and connections for leaks.
- Check the integrity and operation of the anti‑flood sensor (float switch) and replace if faulty.
- Test and, if necessary, repair/replace components such as the water inlet valve and drain pump that may contribute to improper filling/draining.
Parts needed: Flood/anti‑flood sensor, Door seal/gasket, Drain pump assembly, Water inlet valve
- If water is present in the base after drying and basic checks.
- If the error persists after checking spray arm movement, loading, and detergent usage.
- If internal components like the flood sensor, hoses, or seals show signs of damage.
Next step
Choose the next step for i30
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does i30 error mean on Dishlex dishwasher?
The i30 error indicates that the dishwasher's leak detection system has activated due to water detected in the base.
Can I fix Dishlex dishwasher i30 error myself?
Yes, you can perform basic checks by turning off the dishwasher, checking for standing water, and addressing foam issues.
How much does it cost to fix i30 error?
Repair costs for the i30 error can range from ¥10,000 to ¥50,000+, depending on parts and labor.
When should I call a technician for i30?
Call a technician if water remains in the base after drying, or if the error persists despite checking for obstructions.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!