Dishlex Dishwasher Error i60
⚡ Quick Answer: The Dishlex dishwasher error code i60 indicates a malfunction related to the water heating system, preventing the appliance from reaching or maintaini... ✅ DIY Fixable
What Does Error i60 Mean?
The Dishlex dishwasher error code i60 indicates a malfunction related to the water heating system, preventing the appliance from reaching or maintaining the proper temperature during operation. This error often results in the dishwasher stopping mid-cycle, leaving dishes greasy or unclean. Users may hear unusual noises and notice that the dishwasher fails to fill with water properly. Basic troubleshooting includes resetting the unit and ensuring that the water inlet temperature is below 60°C if connected to hot water.
Common Symptoms:
- Dishwasher stops mid‑cycle with error displayed
- Dishes remain greasy or not cleaned due to lack of proper heating
- No obvious electrical fault (power on display)
Possible Causes
- Water Inlet Valve
- Faulty Wiring
- Water Supply Issues
How to Fix Error i60
DIY Fix Basic checks and reset
- Turn off and unplug the dishwasher for a few minutes and then plug it back in.
- Ensure the door is properly closed and latched.
- Check water inlet temperature is below 60°C (if hot water is connected) as too hot inlet can affect performance.
- Clean filters and remove debris if accessible.
Technician Only Professional diagnostics for heating/temperature issues
- Access the dishwasher’s internal components to test the heating element for continuity.
- Measure temperature sensor/thermistor values to check for faults.
- Inspect wiring harnesses for damage or loose connections related to the heater circuit.
- Evaluate the main control board for faults if other components test normally.
Parts needed: heating element, temperature sensor/thermistor, wiring harness, control board
- If the error persists after basic reset attempts
- If there is any sign of electrical smell, overheating, or burning
- When internal components need testing beyond user‑accessible parts
Next step
Choose the next step for i60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does i60 error mean on dishlex dishwasher?
The i60 error indicates a water heating malfunction, causing the dishwasher to stop mid-cycle and dishes to remain unclean.
Can I fix dishlex dishwasher i60 error myself?
Yes, you can try basic troubleshooting like resetting the dishwasher and checking the water inlet temperature.
How much does it cost to fix i60 error?
$100–$500+ depending on parts and labor involved in addressing heating or temperature issues.
When should I call a technician for i60?
Call a technician if the error persists after reset attempts or if you notice any electrical smells or overheating.
Sources & References
- Dishlex Australia Official Website (official)
- Electrolux Dishwasher Error Code i60 Documentation (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!