Dishlex Dishwasher Error iB0

⚡ Quick Answer: The iB0 error code on your Dishlex dishwasher indicates a potential issue with the turbidity sensor, which is responsible for detecting water quality.... ✅ DIY Fixable

What Does Error iB0 Mean?

The iB0 error code on your Dishlex dishwasher indicates a potential issue with the turbidity sensor, which is responsible for detecting water quality. This malfunction can prevent proper drainage and cause the dishwasher to stop shortly after starting, often presenting abnormal sounds during operation. Cleaning the sensor area may resolve the issue, but further diagnosis may be required if the problem persists.

Common Symptoms:

  • Dishwasher stops shortly after start
  • Error code iB0 displayed or repeated blinking
  • Wash cycle does not proceed normally

Possible Causes

  • Turbidity sensor malfunction (medium)
  • Sensor contamination or obstruction (medium)

How to Fix Error iB0

DIY Fix Check and clean the turbidity sensor area

  1. Turn off and unplug the dishwasher.
  2. Locate the turbidity sensor.
  3. Carefully clean any visible deposits on or around the sensor with a soft cloth.
  4. Ensure no debris is obstructing the sensor or sump area.
  5. Restore power and restart the dishwasher to see if the error clears.

Technician Only Diagnose and repair or replace the turbidity sensor

  1. Disconnect power and water supply to the dishwasher.
  2. Access the internal sump and locate the turbidity sensor and associated wiring.
  3. Test the sensor with appropriate diagnostic tools to confirm failure.
  4. Inspect wiring harness for damage or loose connections.
  5. Replace the turbidity sensor if defective.
  6. Reassemble and test the dishwasher for proper operation.

Parts needed: Turbidity sensor, Potential wiring harness components

🛑 When to Call a Pro:
  • If cleaning the sensor area does not clear the error
  • If sensor replacement requires opening sealed sections of the dishwasher
  • If multiple errors accompany iB0

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number DWP-12345
voltage_rating 240V AC

Common Questions

What does iB0 error mean on Dishlex dishwasher?

The iB0 error signifies a turbidity sensor malfunction, causing drainage issues and abnormal operation.

Can I fix Dishlex dishwasher iB0 error myself?

Yes, you can check and clean the turbidity sensor area to potentially resolve the iB0 error.

How much does it cost to fix iB0 error?

Repair costs for the iB0 error range from ¥5,000 to ¥20,000, depending on your region.

When should I call a technician for iB0?

Contact a technician if cleaning the sensor doesn't help, if replacement requires accessing sealed areas, or if multiple error codes appear.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!