Dishlex Dishwasher Error iA0
⚡ Quick Answer: The Dishlex dishwasher error code iA0 typically indicates a malfunction in the drain pump. Users may notice unusual noises during operation, suggestin... ✅ DIY Fixable
What Does Error iA0 Mean?
The Dishlex dishwasher error code iA0 typically indicates a malfunction in the drain pump. Users may notice unusual noises during operation, suggesting a potential issue with water drainage. To address this, ensure the dishwasher door is fully closed, perform a basic reset by disconnecting power for 5–10 minutes, and verify that the water supply is on with no visible leaks or standing water beneath the appliance.
Possible Causes
- Drain Pump
- Electrical Connection
- Control Board Issue
How to Fix Error iA0
DIY Fix Confirm code context and try basic reset
- Ensure the dishwasher door is fully closed and latched.
- Turn off the dishwasher at the mains or unplug it for 5–10 minutes, then restore power and attempt to start a cycle.
- Check that water supply is turned on and that there are no obvious leaks or standing water beneath the machine.
- Inspect visible hoses and filters for blockages and clean if accessible.
Technician Only Contact Dishlex/Electrolux authorised service for code interpretation
- Record the exact code display behavior (steady, flashing, associated lights) along with any other symptoms (no water fill, no drain, noises, etc.).
- Provide the model number and serial number from the dishwasher’s rating plate when contacting support.
- Authorised service may access the internal diagnostic code definitions or test the control board with a service tool.
- If the error persists after basic reset steps.
- If there are signs of water leaking, electrical faults (fuses/trips), or failure to start any cycle.
Next step
Choose the next step for iA0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | DW-PUMP-001 |
| voltage_rating | 240V AC |
Common Questions
What does iA0 error mean on Dishlex dishwasher?
The iA0 error indicates a malfunction in the drain pump, often accompanied by unusual noises.
Can I fix Dishlex dishwasher iA0 error myself?
Yes, you can try a basic reset and check for water supply issues or leaks.
How much does it cost to fix iA0 error?
Repair costs vary by model and region; contact a technician for a quote.
When should I call a technician for iA0?
Call a technician if the error persists after a reset or if there are signs of leaks or electrical issues.
Sources & References
- Dishlex Dishwasher Troubleshooting Support (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!