Dishlex Dishwasher Error i80
⚡ Quick Answer: The Dishlex dishwasher error code i80 typically indicates a malfunction in the drainage system, often linked to an electronics or control module issue... ✅ DIY Fixable
What Does Error i80 Mean?
The Dishlex dishwasher error code i80 typically indicates a malfunction in the drainage system, often linked to an electronics or control module issue. This may result in the dishwasher not starting or stopping unexpectedly, with water pooling at the bottom of the unit. If the error persists after basic troubleshooting, particularly a reset, further investigation of the control module or wiring may be necessary.
Common Symptoms:
- Dishwasher not starting or stopping operation with the i80 code displayed (based on community patterns for similar Electrolux machines).
- Potential auto‑door function or electronic control malfunction indicated in analogous Electrolux references.
Possible Causes
- Electronics/control module malfunction (based on Electrolux references, not verified for Dishlex) (low)
How to Fix Error i80
DIY Fix Power Cycle / Reset Attempt
- Turn off and unplug the dishwasher from power.
- Wait 1 to 5 minutes.
- Plug it back in and restart a cycle to see if the error clears.
Technician Only Check Control Module and Wiring
- Disconnect power at breaker.
- Inspect the main control board for signs of damage, corrosion or faulty connections.
- Test or reprogram the control board if supported by service tools.
- Replace control board if faulty.
Parts needed: Control board / PCB, Connectors and harnesses
- If error persists after reset attempts and basic checks, or if dishwasher fails to start or operate normally.
Next step
Choose the next step for i80
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does i80 error mean on dishlex dishwasher?
The i80 error indicates a drainage system malfunction, often linked to control module issues.
Can I fix dishlex dishwasher i80 error myself?
Yes, you can try resetting the dishwasher by unplugging it for 1-5 minutes before restarting.
How much does it cost to fix i80 error?
The estimated repair cost for the i80 error ranges from $200 to $500, depending on parts and service.
When should I call a technician for i80?
Call a technician if the error persists after reset attempts or if the dishwasher fails to operate normally.
Sources & References
- Electrolux dishwasher displays error code i80 (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!