Dishlex Dishwasher Error E08
⚡ Quick Answer: The Dishlex dishwasher error E08 indicates a malfunction that may be related to the drain pump or water circulation issues. When this error occurs, yo... ✅ DIY Fixable
What Does Error E08 Mean?
The Dishlex dishwasher error E08 indicates a malfunction that may be related to the drain pump or water circulation issues. When this error occurs, you may notice the error code on the control panel, and the dishwasher will stop mid-cycle. Unusual noises during operation may also accompany this error. To troubleshoot, ensure the door is fully closed, the water supply valve is open, and power is disconnected before inspecting further.
Common Symptoms:
- Error code E08 displays on control panel
- Dishwasher stops mid‑cycle
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E08
DIY Fix Basic checks when E08 appears
- Turn off and disconnect power to the dishwasher.
- Check that the door is fully closed and latched.
- Ensure the water supply valve feeding the dishwasher is open.
- Inspect visible hoses for kinks or obvious blockages.
Technician Only Technician diagnosis for E08 code
- Use service manual for the specific Dishlex model to interpret error codes.
- Check water inlet valve and circulation pump for proper operation.
- Check wiring harness and control board error logs if available.
Parts needed: water inlet valve, circulation pump, control board
- If the error persists after basic checks
- If water supply and drainage are confirmed good but E08 still appears
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Dishlex 5220DD1001A |
| voltage_rating | 240V AC |
Common Questions
What does E08 error mean on dishlex dishwasher?
E08 indicates a malfunction potentially related to the drain pump, causing the dishwasher to stop mid-cycle.
Can I fix dishlex dishwasher E08 error myself?
Yes, you can perform basic checks like ensuring the door is latched and the water supply is open.
How much does it cost to fix E08 error?
The repair cost varies and includes a diagnostic fee plus any parts needed.
When should I call a technician for E08?
Call a technician if the error persists after basic checks or if water supply and drainage are confirmed good.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!