Delonghi Oven Error F10

⚡ Quick Answer: The Delonghi oven F10 error code indicates a malfunction in the temperature sensor, often leading to erratic temperature readings or the oven failing ... ⚠️ Difficulty Varies

What Does Error F10 Mean?

The Delonghi oven F10 error code indicates a malfunction in the temperature sensor, often leading to erratic temperature readings or the oven failing to preheat. This issue can disrupt cooking performance, causing frustration and potential meal delays. To address this, a preliminary reset by disconnecting the oven from power for a few minutes may help clear the error. If the F10 code persists, further investigation into the temperature sensor, wiring, or control electronics may be necessary.

Common Symptoms:

  • Oven displays F10 code on control panel
  • Oven fails to heat or stops heating when error appears

Possible Causes

  • Temperature Sensor

How to Fix Error F10

DIY Fix Preliminary checks (limited evidence)

  1. Turn off and disconnect oven from power
  2. Wait a few minutes and restore power to see if the code clears
  3. Observe whether the error reappears

Technician Only Diagnostic inspection (limited evidence)

  1. Inspect oven temperature sensor circuit for continuity and connection integrity
  2. Check wiring harness between sensor and control electronics
  3. Test or consider replacement of the temperature sensor if resistance is out of specification
  4. If sensor and wiring are good, evaluate control electronics with appropriate tools

Parts needed: temperature sensor, wiring harness, control electronics

🛑 When to Call a Pro:
  • If error persists after power reset and visible basic checks
  • If any internal components appear damaged or if you’re not comfortable safely accessing internal parts

Next step

Choose the next step for F10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-2000 ohms
part_number DELONGHI TS-100
voltage_rating 240V AC

Common Questions

What does F10 error mean on delonghi oven?

F10 error indicates a malfunction in the temperature sensor, causing heating issues.

Can I fix delonghi oven F10 error myself?

You can attempt a power reset by disconnecting the oven for a few minutes to see if the error clears.

How much does it cost to fix F10 error?

Repair costs for the F10 error range from ¥5,000 to ¥30,000+, depending on parts and labor.

When should I call a technician for F10?

Call a technician if the error persists after a reset or if internal components appear damaged.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!