Delonghi Oven Error F01

⚡ Quick Answer: The Delonghi oven error code F01 indicates a malfunction in the main oven temperature sensor circuit, which can lead to the oven not heating properly.... ✅ DIY Fixable

What Does Error F01 Mean?

The Delonghi oven error code F01 indicates a malfunction in the main oven temperature sensor circuit, which can lead to the oven not heating properly. This error often manifests shortly after a cooking program is initiated, with the display showing the F01 code. Common causes include a faulty or open-circuit temperature sensor or issues with the wiring harness or connector. Proper inspection and testing can help identify the specific fault.

Common Symptoms:

  • Oven will not heat and display shows F01 shortly after a cooking program is started

Possible Causes

  • Faulty or open-circuit main oven temperature sensor (medium)
  • Shorted or disconnected temperature sensor wiring harness or connector (medium)

How to Fix Error F01

DIY Fix Basic checks before service

  1. Disconnect oven from mains power (turn off circuit breaker or unplug)
  2. Visually inspect the oven’s interior temperature sensor probe for obvious damage
  3. Ensure sensor wiring and connectors appear securely connected

Technician Only Test and repair temperature sensor circuit

  1. Disconnect power and access the oven’s temperature sensor (often a thin metal probe inside the cavity)
  2. Measure resistance of the sensor with a multimeter
  3. Check wiring harness continuity and condition from sensor to control board
  4. Replace sensor if open/short or wiring/connector issues found

Parts needed: Temperature sensor (NTC), Wire harness or connector as needed

🛑 When to Call a Pro:
  • If you are not comfortable working with electrical components inside the oven
  • If basic inspections and sensor checks do not resolve the error

Next step

Choose the next step for F01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 3000W
component Control Board
resistance 5-15 ohms
part_number DELGH-CB-001
voltage_rating 240V AC

Common Questions

What does F01 error mean on delonghi oven?

The F01 error indicates a malfunction in the main oven temperature sensor circuit, causing the oven not to heat.

Can I fix delonghi oven F01 error myself?

Yes, you can perform basic checks like inspecting the temperature sensor and ensuring connections are secure.

How much does it cost to fix F01 error?

The estimated repair cost for parts ranges from $30 to $120, depending on the model and region.

When should I call a technician for F01?

Call a technician if you're uncomfortable working with electrical components or if basic checks don't resolve the issue.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!