Delonghi Dishwasher Error E13

⚡ Quick Answer: The Delonghi dishwasher error E13 indicates a potential water leakage detection issue, often accompanied by a continuous beeping sound and a flashing ... ✅ DIY Fixable

What Does Error E13 Mean?

The Delonghi dishwasher error E13 indicates a potential water leakage detection issue, often accompanied by a continuous beeping sound and a flashing display. This problem may prevent the dishwasher from operating normally. To address this, check the water supply connections, ensure the dishwasher door is securely closed, and inspect filters and drain hoses for blockages.

Possible Causes

  • Leakage sensor failure
  • Damaged water inlet valve
  • Clogged drain or filter

How to Fix Error E13

DIY Fix Check dishwasher basics

  1. Inspect water supply and ensure cold water feed is connected and valve is open.
  2. Check filters and drain hose for blockages.
  3. Ensure dishwasher door is fully closed.

Technician Only Contact Delonghi service

  1. Provide full model number to Delonghi support to clarify meaning of E13.
  2. Arrange inspection if problem persists or if the dishwasher will not operate normally.
🛑 When to Call a Pro:
  • Dishwasher won't start or operate normally even after basic checks.
  • Any signs of water leakage, unusual noises, or if error persists.

Next step

Choose the next step for E13

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 1500W
component Leakage sensor
resistance 5-15 ohms
part_number DeLonghi 123456789
voltage_rating 120V AC

Common Questions

What does E13 error mean on delonghi dishwasher?

E13 indicates a water leakage detection issue, often with beeping and a flashing display.

Can I fix delonghi dishwasher E13 error myself?

Yes, check the water supply, ensure the door is closed, and inspect for blockages.

How much does it cost to fix E13 error?

Repair costs vary by model and region, depending on the issue.

When should I call a technician for E13?

Call a technician if the dishwasher won't start or if the error persists after basic checks.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!