De'Longhi Dishwasher Error E2
⚡ Quick Answer: The De'Longhi dishwasher error E2 indicates a drainage malfunction where the appliance fails to remove water from the tub effectively. This typically ... ✅ DIY Fixable
What Does Error E2 Mean?
The De'Longhi dishwasher error E2 indicates a drainage malfunction where the appliance fails to remove water from the tub effectively. This typically occurs during the wash or drain phases, leading to standing water and unusual noises. The most common causes include a clogged drain filter or drain hose, as well as a malfunctioning drain pump.
Common Symptoms:
- Dishwasher stops mid‑cycle with water remaining in the tub
- Error displayed shortly after wash or drain phase begins
- Possible slow or no drainage indicated by standing water
Possible Causes
- Clogged or blocked drain filter or drain hose (medium)
- Malfunctioning drain pump (medium)
How to Fix Error E2
DIY Fix Check and clear drain blockages
- Turn off and unplug the dishwasher.
- Remove and inspect the drain filter at the bottom of the tub for debris.
- Clear any visible blockages and clean the filter.
- Check the drain hose for kinks or obstructions and straighten/clear as needed.
- Restart the dishwasher to see if the E2 error clears.
Technician Only Inspect or replace drain pump and internal drainage components
- Disconnect power and water supply.
- Remove access panels to locate the drain pump assembly.
- Test the drain pump for continuity and operation; replace if faulty.
- Verify proper connection and integrity of drain hose and fittings.
- Reassemble and test dishwasher drainage performance.
Parts needed: Drain pump, Drain hose, Seals/gaskets as needed
- If water is leaking from the dishwasher
- If error persists after clearing filters and hoses
- If drain pump testing indicates failure requiring parts replacement
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 10-20 ohms |
| part_number | DELPUMP1234 |
| voltage_rating | 120V AC |
Common Questions
What does E2 error mean on delonghi dishwasher?
E2 error indicates a drainage issue, often with standing water and unusual noises.
Can I fix delonghi dishwasher E2 error myself?
Yes, you can check and clear drain blockages and clean the filter.
How much does it cost to fix E2 error?
Repair costs range from $80 to $250, depending on parts and labor.
When should I call a technician for E2?
Call a technician if water is leaking, the error persists after checks, or if the drain pump fails.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!