Delonghi Dehumidifier Error E6

⚡ Quick Answer: The E6 error code on your DeLonghi dehumidifier indicates a malfunction in the internal communication between the display board and the main control P... ⚠️ Difficulty Varies

What Does Error E6 Mean?

The E6 error code on your DeLonghi dehumidifier indicates a malfunction in the internal communication between the display board and the main control PCB. This usually results in the unit powering on but failing to start the fan or compressor, often accompanied by erratic display readings. The issue may stem from a loose or damaged connector or a faulty control board.

Common Symptoms:

  • Unit powers on but does not start the fan or compressor
  • Error code E6 displayed on the panel

Possible Causes

  • Loose or damaged connector between display board and main PCB (medium)
  • Faulty display PCB or main control PCB (medium)

How to Fix Error E6

DIY Fix Basic check and reset

  1. Unplug the dehumidifier from the power outlet.
  2. Wait a few minutes and plug it back in.
  3. Power on the unit to see if E6 persists.

Technician Only Inspect and repair internal communication wiring

  1. Disconnect power and open the control panel to access internal PCBs.
  2. Inspect the wiring harness and connectors between the display board and main PCB.
  3. Reseat or replace connectors/cables showing damage, corrosion, or poor contact.
  4. Test the dehumidifier after reassembly.

Parts needed: Display board to main PCB wiring harness, Connectors

Technician Only Replace defective PCB

  1. Verify connection integrity first; if E6 remains, confirm fault on display or main PCB.
  2. Order correct replacement PCB(s) for the model.
  3. Power down and discharge capacitors.
  4. Swap out the defective PCB and reassemble the unit.
  5. Test operation to ensure E6 is resolved.

Parts needed: Display PCB, Main control PCB

🛑 When to Call a Pro:
  • If you are not confident opening the unit or working with electronics
  • If E6 persists after checking connections and basic technician-level troubleshooting

Technical Specifications

wattage 300W
component Humidity Sensor
resistance 5-15 ohms
part_number DLS-1001
voltage_rating 120V AC

Common Questions

What does E6 error mean on delonghi dehumidifier?

E6 error indicates a malfunction in the internal communication, preventing the fan and compressor from starting.

Can I fix delonghi dehumidifier E6 error myself?

Yes, you can try unplugging the unit for a few minutes and plugging it back in to reset it.

How much does it cost to fix E6 error?

The estimated cost for parts to fix E6 is between $10 and $50, excluding labor.

When should I call a technician for E6?

Call a technician if E6 persists after basic troubleshooting or if you're unsure about working with electronics.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!