De'Longhi Dehumidifier Error E5
⚡ Quick Answer: The Delonghi dehumidifier E5 error code indicates a malfunction related to high-pressure protection, typically linked to the humidity sensor or compre... ✅ DIY Fixable
What Does Error E5 Mean?
The Delonghi dehumidifier E5 error code indicates a malfunction related to high-pressure protection, typically linked to the humidity sensor or compressor issues. This can manifest as the unit stopping shortly after startup, the compressor attempting to start but cutting out, and no water being collected. The cause may be due to compressor overload, blocked condenser, or restricted airflow, leading to abnormal operating conditions.
Common Symptoms:
- Unit stops operation shortly after startup with E5 displayed
- Compressor tries to start (hums) then cuts out
- No water collection despite attempt to run
Possible Causes
- Compressor overload / high-pressure protection triggered (medium)
- Blocked condenser / restricted airflow leading to high pressure (medium)
How to Fix Error E5
DIY Fix Basic checks and reset
- Unplug the unit and wait for a few minutes.
- Ensure the dehumidifier is placed in a well‑ventilated area with good airflow.
- Clean or vacuum dust from intake and condenser coils if accessible.
- Plug the unit back in and restart to see if E5 clears.
Technician Only Diagnose compressor and refrigerant system
- Verify compressor start behavior and current draw with appropriate instruments.
- Check condenser fan operation and airflow through coils.
- Inspect high‑pressure switch and related wiring.
- Assess refrigerant charge and measure system pressures if trained and certified.
- Replace faulty compressor start relay or high‑pressure switch as needed.
Parts needed: compressor start relay, high‑pressure switch, condenser fan or motor
- If E5 persists after basic user‑level reset and cleaning
- If there are unusual noises under load or signs of refrigerant leak
- If internal electrical components are suspected faulty
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Humidity Sensor
Measures relative humidity so the appliance can regulate drying or moisture removal.
- Typical part-only price
- $20 - $100
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Compressor
Compresses refrigerant within the sealed cooling system and requires specialized service equipment.
Model-compatible Dehumidifier parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 300W |
|---|---|
| component | Humidity Sensor |
| resistance | 500-1000 ohms |
| part_number | DeLonghi 7332135600 |
| voltage_rating | 120V AC |
Common Questions
What does E5 error mean on delonghi dehumidifier?
E5 indicates a high-pressure protection issue, often linked to the compressor or humidity sensor.
Can I fix delonghi dehumidifier E5 error myself?
Yes, you can perform basic checks, reset the unit, and ensure good airflow.
How much does it cost to fix E5 error?
Repair costs typically range from $100 to $300+, depending on parts and labor.
When should I call a technician for E5?
Call a technician if E5 persists after a reset or if you notice unusual noises or signs of a refrigerant leak.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!