Delonghi Dehumidifier Error E10

⚡ Quick Answer: The E10 error code on your DeLonghi dehumidifier indicates a malfunction in the humidity sensor, which may lead to erratic display behavior or the uni... ✅ DIY Fixable

What Does Error E10 Mean?

The E10 error code on your DeLonghi dehumidifier indicates a malfunction in the humidity sensor, which may lead to erratic display behavior or the unit failing to operate. This issue can disrupt the dehumidification process and may require attention to ensure proper functioning.

Possible Causes

  • Humidity Sensor

How to Fix Error E10

DIY Fix General troubleshooting (due to lack of specific data)

  1. Ensure dehumidifier power is unplugged and reconnect after a short wait to clear potential transient errors.
  2. Verify the water tank is seated correctly and is empty, as tank positioning issues can prevent operation on some models.
  3. Check and clean air intake filter to ensure airflow is unobstructed.
  4. Inspect for obvious blockage or frost around coils (common dehumidifier issues).

Technician Only Inspect internal sensors and control circuitry

  1. With power off, test sensors related to condensate and control board for continuity or fault signals.
  2. Check wiring harness connections to main PCB and display board for loose or corroded terminals.
  3. Examine and test control board functionality with diagnostic equipment if available.

Parts needed: humidity/temperature sensors, wiring harness, control board

🛑 When to Call a Pro:
  • If error code persists after basic checks and resets.
  • If internal component tests (sensors or control board) indicate faults.
  • If there is evidence of refrigerant system failure or significant electrical faults.

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

HVAC Control Board

Controls fan, compressor, sensor, and communication functions in the HVAC unit.

$90 - $320 · Hard · 45-120 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 300W
component Humidity Sensor
resistance 5-10 kOhms
part_number DLS-12345
voltage_rating 120V AC

Common Questions

What does E10 error mean on delonghi dehumidifier?

The E10 error indicates a fault in the humidity sensor, causing display issues or failure to operate.

Can I fix delonghi dehumidifier E10 error myself?

Yes, you can try basic troubleshooting such as resetting the unit, checking the water tank, and cleaning the air filter.

How much does it cost to fix E10 error?

The estimated repair cost for the E10 error ranges from $50 to $300+, depending on parts and labor.

When should I call a technician for E10?

Call a technician if the error persists after basic checks or if internal components test faulty.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!