Danby Dishwasher Error E3
⚡ Quick Answer: The Danby Dishwasher E3 error indicates a drain pump failure, often resulting in the machine stopping mid-cycle and failing to drain water. This issue... ✅ DIY Fixable
What Does Error E3 Mean?
The Danby Dishwasher E3 error indicates a drain pump failure, often resulting in the machine stopping mid-cycle and failing to drain water. This issue may arise from a clogged drain pump or a blocked drain hose, leading to unusual noises during operation. Inspecting and clearing the drain components can often resolve the problem.
Common Symptoms:
- Dishwasher stops mid‑cycle with E3 displayed
- Possible standing water or failure to drain properly
- Error clears after inspection/cleaning of drain components
Possible Causes
- Clogged drain pump or debris in drain pump (medium)
- Blocked drain hose (medium)
How to Fix Error E3
DIY Fix Inspect and clear drain components
- Unplug the dishwasher and turn off water supply.
- Check the drain hose for kinks or visible blockages; remove if necessary.
- Remove the bottom access panel and inspect the drain pump for debris.
- Clean out any visible blockages from the pump housing and hose.
- Restore power and run a short drain cycle to test if E3 clears.
Technician Only Service or replace drain pump/hose components
- Confirm error persists after basic user‑level cleaning.
- Test the drain pump motor for proper electrical operation using a multimeter.
- Inspect and, if needed, replace the drain pump assembly.
- Check the integrity of the drain hose; replace if obstructed or damaged.
- Verify correct installation of drain hose (proper loop to prevent siphoning).
Parts needed: Drain pump assembly, Drain hose
- If the error recurs after cleaning the drain system
- If there is evidence of water leakage or electrical malfunction
- If you are uncomfortable performing any internal inspection
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 20-30 ohms |
| part_number | Danby 106052 |
| voltage_rating | 120V AC |
Common Questions
What does E3 error mean on Danby Dishwasher?
E3 error indicates a drain pump failure, causing the dishwasher to stop mid-cycle and fail to drain.
Can I fix Danby Dishwasher E3 error myself?
Yes, you can inspect and clear the drain pump and hose to resolve the E3 error.
How much does it cost to fix E3 error?
The estimated repair cost for E3 error is $50–$200 for parts, plus labor.
When should I call a technician for E3?
Call a technician if the error persists after cleaning or if you notice water leaks or electrical issues.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!