Danby Dishwasher Error E2
⚡ Quick Answer: The Danby Dishwasher E2 error signals a drainage issue, typically characterized by water remaining in the tub during or after a cycle. This error ofte... ✅ DIY Fixable
What Does Error E2 Mean?
The Danby Dishwasher E2 error signals a drainage issue, typically characterized by water remaining in the tub during or after a cycle. This error often stems from a malfunctioning drain pump or a clogged drain hose and filter, leading to unusual noises and a failure to drain properly.
Common Symptoms:
- Water remaining in the tub after or during a cycle
- Dishwasher stops mid‑cycle with E2 displayed
- Drainage failure triggers the error
Possible Causes
- Drain Pump Malfunction (medium)
- Clogged or Blocked Drain Hose/Filter (medium)
How to Fix Error E2
DIY Fix Check and Clear Drain Blockages
- Turn off and unplug the dishwasher.
- Remove the bottom rack to access the filter and drain.
- Clean the filter of debris and rinse under running water.
- Inspect the drain hose for kinks and remove any visible blockages.
Technician Only Inspect and Service Drain Pump
- Disconnect power and water supply.
- Remove access panels to reach the drain pump.
- Test the drain pump for electrical continuity and mechanical function.
- Replace the drain pump if faulty or obstructed.
Parts needed: Drain pump assembly, Gaskets/clamps for drain hose
- If the error persists after clearing visible blockages and basic user maintenance.
- If you are uncomfortable performing technical pump inspection or replacement.
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on Danby Dishwasher?
The E2 error indicates a drainage malfunction, often leaving water in the tub.
Can I fix Danby Dishwasher E2 error myself?
Yes, you can check for clogs and clean the filter to resolve the E2 error.
How much does it cost to fix E2 error?
Repair costs for the E2 error range from USD 80 to 250, depending on parts and labor.
When should I call a technician for E2?
Call a technician if the error persists after clearing blockages or if you're uncomfortable with repairs.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!