Danby Dehumidifier Error P2

⚡ Quick Answer: The Danby dehumidifier P2 error code indicates that the water bucket is either full or not properly positioned. This error often results in the unit s... ✅ DIY Fixable

What Does Error P2 Mean?

The Danby dehumidifier P2 error code indicates that the water bucket is either full or not properly positioned. This error often results in the unit shutting down, a flashing display light, and may activate the 'bucket full' indicator. In models equipped with a pump, the P2 error may also relate to the pump or float switch detecting a full bucket condition.

Common Symptoms:

  • Display shows P2
  • Unit stops running/turns off
  • ‘Bucket full’ indicator light may illuminate
  • Unit may beep when error is active

Possible Causes

  • Full water bucket or incorrect bucket placement (high)
  • Faulty or stuck float switch inside the bucket or reservoir (medium)

How to Fix Error P2

DIY Fix Check and correct water bucket status

  1. Turn off and unplug the dehumidifier.
  2. Remove the water bucket and empty any collected water.
  3. Inspect the bucket for proper seating and ensure it is inserted fully and correctly.
  4. Plug in and restart the unit to see if the P2 error clears.

Technician Only Inspect/clean float switch and pump assembly

  1. Disconnect power and remove the water bucket.
  2. Inspect the float switch inside the bucket/reservoir area for debris or misalignment.
  3. Clean the float switch and surrounding area to ensure free movement.
  4. Test the float switch continuity; replace if faulty.
  5. Verify the condensate pump functions normally and hoses are unobstructed.

Parts needed: Float switch, Pump assembly (if applicable)

🛑 When to Call a Pro:
  • If the P2 error persists after checking/emptying the bucket and proper placement.
  • If water is leaking from the unit when the bucket is correctly installed.
  • If internal components (float switch or pump) appear damaged or non‑functional.

Technical Specifications

wattage 300W
component Water Tank Sensor
resistance N/A
part_number DB-PT-001
voltage_rating 120V AC

Common Questions

What does P2 error mean on Danby dehumidifier?

The P2 error indicates the water bucket is full or improperly placed, causing the unit to stop running.

Can I fix Danby dehumidifier P2 error myself?

Yes, you can check and empty the water bucket and ensure it is correctly positioned.

How much does it cost to fix P2 error?

The estimated repair cost for the P2 error ranges from $30 to $150.

When should I call a technician for P2?

Call a technician if the error persists after checking the bucket or if you notice leaks or damaged components.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!