Champion Dishwasher Error E2F

⚡ Quick Answer: The Champion Dishwasher E2F error indicates a malfunction of the rinse temperature thermistor, which measures the final rinse water temperature. Sympt... ✅ DIY Fixable

What Does Error E2F Mean?

The Champion Dishwasher E2F error indicates a malfunction of the rinse temperature thermistor, which measures the final rinse water temperature. Symptoms include the error code displayed on the control panel, potential failure to register the rinse temperature, and possible issues with reaching the correct rinse temperature. Unusual noises may also accompany the malfunction and the dishwasher may not drain properly.

Common Symptoms:

  • Error code E2F displayed on control panel
  • Wash cycle may proceed but rinse temperature reading is not registered
  • Potential failure to reach proper rinse temperature

Possible Causes

  • Faulty rinse temperature thermistor (medium)

How to Fix Error E2F

DIY Fix Basic inspection of rinse temperature sensor and connections

  1. Turn off and unplug the dishwasher before inspecting.
  2. Locate the rinse temperature thermistor.
  3. Visually inspect the sensor wiring and connectors for obvious damage or looseness.

Technician Only Replace rinse temperature thermistor

  1. Disconnect power and water supply.
  2. Access the rinse temperature thermistor (usually mounted near the rinse heater area).
  3. Remove the faulty thermistor and install a manufacturer-specified replacement.
  4. Test operation after replacement to confirm E2F no longer appears.

Parts needed: Rinse temperature thermistor

🛑 When to Call a Pro:
  • If the error persists after replacing the thermistor or if you cannot safely access internal components.
  • If other error codes accompany E2F indicating unrelated failures.

Next step

Choose the next step for E2F

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E2F error mean on Champion Dishwasher?

E2F indicates a malfunction in the rinse temperature thermistor, affecting rinse temperature measurement.

Can I fix Champion Dishwasher E2F error myself?

Yes, you can inspect the rinse temperature sensor and its connections after unplugging the dishwasher.

How much does it cost to fix E2F error?

Repair costs for the E2F error typically range from ¥3,000 to ¥12,000 for the thermistor, depending on the model.

When should I call a technician for E2F?

Call a technician if the error persists after replacing the thermistor or if you cannot safely access internal components.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!