Champion Dishwasher Error E2

⚡ Quick Answer: The Champion dishwasher E2 error indicates a malfunction related to the wash tank heater or heat-up timeout, resulting in the dishwasher filling but f... ⚠️ Difficulty Varies

What Does Error E2 Mean?

The Champion dishwasher E2 error indicates a malfunction related to the wash tank heater or heat-up timeout, resulting in the dishwasher filling but failing to heat the water to the required wash temperature. Common causes include a failed heating element, defective temperature sensor, or issues with the heater contactor. Users may notice cold cycle runs that do not meet set wash temperatures.

Common Symptoms:

  • Dishwasher fills but does not heat
  • Cycle runs cold and fails to reach set wash temperature

Possible Causes

  • Wash tank heating element failure (medium)
  • Defective temperature sensor or thermostat (medium)
  • Heater contactor or relay failure (medium)

How to Fix Error E2

DIY Fix Basic Heater System Checks (Safe Power Off)

  1. Turn off power to dishwasher at breaker and verify power is disconnected.
  2. Check for visible damage/corrosion at accessible heater connections.
  3. Report findings (e.g., burnt wires) to a technician.

Technician Only Heater and Temperature Component Diagnostics

  1. Verify supply voltage at dishwasher heater terminals with a multimeter.
  2. Measure resistance of wash tank heater element; replace if open circuit.
  3. Test high‑limit thermostat and temperature probe against manufacturer specs.
  4. Inspect and test heater contactor/relay operation; replace if faulty.

Parts needed: Wash tank heating element, High‑limit thermostat, Temperature probe (NTC sensor), Heater contactor or relay

🛑 When to Call a Pro:
  • If you are uncomfortable working with high‑voltage dishwasher components.
  • After confirming heater and temperature sensors show electrical faults.
  • If the error persists after basic checks.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Champion 123456789
voltage_rating 120V AC

Common Questions

What does E2 error mean on Champion dishwasher?

E2 error indicates failure in the wash tank heater, preventing the dishwasher from heating water.

Can I fix Champion dishwasher E2 error myself?

Yes, you can perform basic checks like inspecting heater connections after safely powering off the unit.

How much does it cost to fix E2 error?

Repair costs typically range from $150 to $600+, depending on parts and labor.

When should I call a technician for E2?

Call a technician if you're uncomfortable with high-voltage components or if issues persist after basic checks.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!