Champion Dishwasher Error E2C
⚡ Quick Answer: The Champion Dishwasher E2C error indicates a malfunction with the rinse temperature thermistor, which may not be functioning or detected properly. Co... ❌ Professional Repair Recommended
What Does Error E2C Mean?
The Champion Dishwasher E2C error indicates a malfunction with the rinse temperature thermistor, which may not be functioning or detected properly. Common symptoms include the error code displayed on the control panel, the rinse cycle failing to reach the correct temperature, and potential halting during rinse heating. If unresolved, this can hinder the dishwasher's performance.
Common Symptoms:
- Dishwasher displays E2C error on control panel
- Rinse cycle may not reach correct temperature or may stop
- Dishwasher may halt or flag an error during rinse heating
Possible Causes
- Faulty or broken rinse temperature thermistor (temperature sensor) (medium)
How to Fix Error E2C
Technician Only Inspect and Replace Rinse Temperature Thermistor
- Disconnect power to the dishwasher.
- Locate the rinse temperature thermistor (typically mounted on the rinse heater or rinse area).
- Visually inspect the thermistor and wiring for damage or disconnection.
- Use a multimeter to check thermistor resistance against manufacturer specifications.
- Replace the thermistor if it is open/shorted or outside specification.
- Reassemble and restore power, then test operation.
Parts needed: Rinse temperature thermistor / temperature sensor
- If the error persists after thermistor replacement
- If multiple error codes appear
- If there are signs of wiring damage or control board issues
Next step
Choose the next step for E2C
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2C error mean on Champion Dishwasher?
E2C indicates a malfunction in the rinse temperature thermistor, affecting the rinse cycle.
Can I fix Champion Dishwasher E2C error myself?
No DIY actions are available; this issue requires professional inspection.
How much does it cost to fix E2C error?
Repair costs range from $30 to $120 for the thermistor part, plus labor.
When should I call a technician for E2C?
Call if the error persists after thermistor replacement or if multiple errors appear.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!