Champion Dishwasher Error E1F
⚡ Quick Answer: The Champion Dishwasher E1F error code indicates a problem with the wash temperature thermistor, which prevents the wash tank heater from working effe... ⚠️ Difficulty Varies
What Does Error E1F Mean?
The Champion Dishwasher E1F error code indicates a problem with the wash temperature thermistor, which prevents the wash tank heater from working effectively. This results in the dishwasher failing to heat the wash water to the required temperature, causing cycles to stop prematurely and temperature displays to register incorrectly. If you hear unusual sounds or see water pooling inside the unit, it may be linked to this issue.
Common Symptoms:
- Dishwasher fails to heat wash water to set temperature
- Cycle may stop or abort due to temperature problem
- Temperature display may read unexpectedly low or fail to register proper readings
Possible Causes
- Defective wash temperature thermistor (medium)
How to Fix Error E1F
DIY Fix Basic checks before service
- Power off the dishwasher and disconnect it from mains power.
- Check that the dishwasher has proper water supply and the cycle was not prematurely stopped due to unrelated issues.
- Restart the dishwasher after a brief power off to see if the code persists (basic reset).
Technician Only Inspect and replace wash temperature thermistor
- Disconnect power and water supply.
- Access the dishwasher control panel and locate the wash temperature thermistor per service manual for the specific Champion model.
- Test thermistor resistance at various temperatures to confirm malfunction.
- Replace thermistor if readings are out of specification.
- Reassemble and test dishwasher operation and wash temperature function.
Parts needed: Wash temperature thermistor, Possibly wiring harness/connectors
- If you do not have technical skills to safely access internal sensors or the error persists after reset attempts.
- If dishwasher displays additional error codes simultaneous with E1F.
Next step
Choose the next step for E1F
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E1F error mean on Champion Dishwasher?
E1F indicates a broken wash temperature thermistor, disrupting the heating process.
Can I fix Champion Dishwasher E1F error myself?
You can try basic checks like resetting the dishwasher and ensuring proper water supply.
How much does it cost to fix E1F error?
Repair costs range from $50 to $150 for parts plus labor, depending on your location.
When should I call a technician for E1F?
Call a technician if the error persists after resets or if other error codes appear.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!