Champion Dishwasher Error BH
⚡ Quick Answer: The Champion Dishwasher BH error indicates a potential issue with the drain pump, often resulting in unusual noises during operation. This error may s... ✅ DIY Fixable
What Does Error BH Mean?
The Champion Dishwasher BH error indicates a potential issue with the drain pump, often resulting in unusual noises during operation. This error may stem from a malfunction in the pump or related components. To troubleshoot, ensure that the door is fully closed, cancel the current cycle, and restart the dishwasher. If the problem persists after these steps, further investigation may be required.
Possible Causes
- Drain Pump Assembly
- Electrical Connection
- Control Board Issue
How to Fix Error BH
DIY Fix Check basic door and cycle state
- Ensure the dishwasher door is fully closed and latched properly.
- Cancel the current cycle and attempt a restart of the dishwasher.
- Turn off the dishwasher power at the breaker for about 1 minute, then turn it back on.
Technician Only Consult manufacturer or technician
- Contact Champion technical support or a qualified service technician to identify the meaning of the BH code for the specific model.
- Check the service manual for the exact model for documentation of the BH error code.
- Inspect door latch and control board connections if relevant documentation suggests issues with those components.
Parts needed: Door latch assembly (if applicable), Control board / harness connectors
- If the error persists after basic checks and power cycling.
- If any signs of water leakage, burning smell, or unusual noises are present.
Next step
Choose the next step for BH
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does BH error mean on Champion Dishwasher?
The BH error indicates a malfunction in the drain pump, often with unusual noises.
Can I fix Champion Dishwasher BH error myself?
Yes, check the door latch, restart the cycle, or power cycle the dishwasher.
How much does it cost to fix BH error?
Repair costs vary, with diagnostics typically $50–$150 and parts ranging from $20–$200.
When should I call a technician for BH?
Contact a technician if the error persists after troubleshooting or if you notice water leakage or burning smells.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!