Candy Induction Hob Error ER03
⚡ Quick Answer: The Candy Induction Hob ER03 error indicates a fault in the touch control panel or sensor, often triggered by moisture or residue causing continuous t... ✅ DIY Fixable
What Does Error ER03 Mean?
The Candy Induction Hob ER03 error indicates a fault in the touch control panel or sensor, often triggered by moisture or residue causing continuous touch detection. This may result in unresponsive controls, a flashing display, or unusual buzzing sounds. Proper cleaning of the control surface can often resolve this issue.
Common Symptoms:
- Error appears immediately on power on or during normal use
- Hob may show lock or unresponsive controls
- Touch controls may appear to be continuously activated
Possible Causes
- Moisture or liquid on touch control surface causing false continuous touch detection (medium)
- Touch control or sensor fault (false continuous input detection) (medium)
How to Fix Error ER03
DIY Fix Inspect and clean touch control panel
- Turn off and disconnect power to the hob.
- Check the touch control area for any liquid, moisture, grease, or food residue.
- Use a soft dry cloth to wipe and thoroughly dry the control surface.
- After cleaning and drying, reconnect power and see if the error clears.
DIY Fix Reset hob after cleaning controls
- Disconnect the hob from power for at least 5 minutes.
- Ensure the control panel is completely dry.
- Reconnect power and attempt to operate the hob normally.
Technician Only Inspect touch control board and sensors
- Verify that the touch panel sensors are functioning correctly.
- Check for corrosion, damaged wiring, or failed touch interface components.
- Replace touch control board or sensor elements if necessary.
Parts needed: Touch control panel assembly, Control board if needed
- If error persists after cleaning and reset
- If controls are unresponsive or hob cannot be used normally
- If there is visible damage to the control panel
Next step
Choose the next step for ER03
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does ER03 error mean on Candy Induction Hob?
ER03 indicates a malfunction in the touch control panel, often due to moisture causing continuous input detection.
Can I fix Candy Induction Hob ER03 error myself?
Yes, you can clean the touch control panel and reset the hob after ensuring it's dry.
How much does it cost to fix ER03 error?
Repair costs for the ER03 error range from $80 to $250, depending on the model and region.
When should I call a technician for ER03?
Call a technician if the error persists after cleaning, if controls remain unresponsive, or if there's visible damage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!