Candy Induction Hob Error E2

⚡ Quick Answer: The Candy Induction Hob E2 error indicates an abnormal power supply or voltage issue, causing the hob to display E2 and fail to heat. This issue may a... ✅ DIY Fixable

What Does Error E2 Mean?

The Candy Induction Hob E2 error indicates an abnormal power supply or voltage issue, causing the hob to display E2 and fail to heat. This issue may arise from unstable electrical conditions or a malfunctioning induction coil. Ensure the mains supply voltage is within the acceptable range (220-240 V AC) to resolve the error.

Common Symptoms:

  • Hob displays E2 on the panel and refuses to operate normally
  • Cooktop may shut off or not heat

Possible Causes

  • Abnormal power supply (voltage outside normal range) (medium)

How to Fix Error E2

DIY Fix Check and stabilize mains supply

  1. Turn off the induction hob and disconnect from mains power.
  2. Verify that the household electrical supply voltage is within the acceptable range for the hob.
  3. Ensure there are no loose plugs or damaged cables.
  4. Reconnect power and restart the hob.

Technician Only Inspect and repair electrical supply and components

  1. Measure actual voltage at the hob’s supply terminals with a qualified meter.
  2. Inspect internal wiring, mains filter, and power circuitry for damage due to voltage anomalies.
  3. Replace any damaged components and verify correct electrical connection.

Parts needed: power wiring, mains filter, control board if damaged due to voltage spike

🛑 When to Call a Pro:
  • If the error persists after verifying and stabilizing mains power
  • If there are signs of internal electrical damage (burnt smell, visible damage)

Technical Specifications

wattage 2000W
component Induction Coil
resistance 10-30 ohms
part_number Candy C00312345
voltage_rating 230V AC

Common Questions

What does E2 error mean on Candy Induction Hob?

E2 error indicates an abnormal power supply, causing the hob to malfunction with no heating.

Can I fix Candy Induction Hob E2 error myself?

Yes, check the mains supply and ensure voltage is stable between 220-240 V AC.

How much does it cost to fix E2 error?

Repair costs range from ¥10,000 to ¥40,000, depending on the region and required parts.

When should I call a technician for E2?

Call a technician if the error persists after stabilizing power or if you notice signs of internal damage.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!