Breville Microwave Error E14

⚡ Quick Answer: The Breville microwave error code E14 signifies a door latch mechanism misalignment or closure fault. This error often occurs even when the microwave ... ✅ DIY Fixable

What Does Error E14 Mean?

The Breville microwave error code E14 signifies a door latch mechanism misalignment or closure fault. This error often occurs even when the microwave door appears closed, preventing the unit from starting and heating food. Users may hear unusual buzzing sounds, indicating a malfunction. To address this issue, basic inspections can be performed to check for door alignment and obstructions before seeking professional repair services.

Common Symptoms:

  • Display shows E14 when attempting to start
  • Microwave door appears closed but unit will not start
  • Microwave refuses to begin heating despite normal operation attempts

Possible Causes

  • Door latch mechanism misalignment or wear (medium)

How to Fix Error E14

DIY Fix Basic inspection and reset

  1. Ensure the microwave is unplugged before inspection for safety.
  2. Check that the door closes evenly and nothing obstructs the door frame.
  3. Open and close the door firmly a few times to see if the error clears.
  4. Plug the microwave back in and attempt to start a basic function to see if E14 persists.

Technician Only Adjust or replace door latch components

  1. Unplug and safety discharge internal capacitors before work begins.
  2. Remove necessary exterior panels to access door latch assembly.
  3. Inspect latch hooks, hinges, and receiver for wear, cracks, or deformation.
  4. Adjust hinge alignment as needed and replace worn/misaligned door latch hardware.
  5. Test door closure detection and verify error code no longer appears.

Parts needed: Door latch assembly, Hinges or screws as needed

🛑 When to Call a Pro:
  • If E14 persists after basic inspection and resetting power
  • If door frame or latch components are visibly damaged
  • If microwave still will not start after professional latch adjustment

Technical Specifications

wattage 900W
component Magnetron
resistance 0.5-1.5 ohms
part_number BMO700SIL-MAG
voltage_rating 120V AC

Common Questions

What does E14 error mean on Breville microwave?

E14 indicates a door latch misalignment or a closure fault, preventing the microwave from starting.

Can I fix Breville microwave E14 error myself?

Yes, you can perform basic inspections, ensuring the door closes evenly and is not obstructed.

How much does it cost to fix E14 error?

The estimated repair cost ranges from $30 to $120 for parts, excluding labor.

When should I call a technician for E14?

Call a technician if E14 persists after inspections or if you notice visible damage to the door components.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!