Breville Microwave Error E03

⚡ Quick Answer: The Breville microwave error code E03 indicates a malfunction in the high-voltage system, typically linked to the magnetron or associated components. ... ⚠️ Difficulty Varies

What Does Error E03 Mean?

The Breville microwave error code E03 indicates a malfunction in the high-voltage system, typically linked to the magnetron or associated components. Users may notice that the microwave powers on with the turntable operating and the light on, but it fails to heat food. This error often occurs a few seconds into a cooking cycle, signaling a potential issue with the magnetron, high-voltage diode, capacitor, or transformer.

Common Symptoms:

  • Microwave appears to power on and may run (turntable rotates, light on) but fails to heat food.
  • Error code E03 displayed after starting a cook cycle.
  • Failure occurs a few seconds into operation rather than immediately at startup.

Possible Causes

  • High‑voltage system failure (magnetron/diode/capacitor/transformer) (medium)
  • Overheat protection / thermal fault (indirect evidence) (low)

How to Fix Error E03

DIY Fix Basic checks & reset

  1. Unplug microwave from power for at least 5 minutes to allow internal capacitors to discharge and control circuits to reset.
  2. Ensure the microwave has proper ventilation and isn’t enclosed or overheating.
  3. Try heating a cup of water after reset to see if code returns.

Technician Only Inspect and replace high‑voltage subsystem components

  1. Discharge internal high‑voltage capacitor safely.
  2. Test and if necessary replace magnetron.
  3. Check high‑voltage diode and capacitor for failures; replace as needed.
  4. Verify high‑voltage transformer and related wiring connections are intact.
  5. Test thermal sensors and interlocks to rule out overheating safety trips.

Parts needed: magnetron, high‑voltage diode, high‑voltage capacitor, transformer, thermal sensor

🛑 When to Call a Pro:
  • If error returns after basic reset.
  • If microwave still fails to heat after ensuring proper ventilation and reset.
  • If any internal components show signs of damage or burning.

Technical Specifications

wattage 900W
component Magnetron
resistance 0.5-1.5 ohms
part_number BMO700SIL-MAG
voltage_rating 120V AC

Common Questions

What does E03 error mean on breville microwave?

E03 indicates a malfunction in the high-voltage system, often related to the magnetron, resulting in the microwave not heating food.

Can I fix breville microwave E03 error myself?

Yes, you can try basic checks like unplugging the microwave for 5 minutes and ensuring proper ventilation to reset the system.

How much does it cost to fix E03 error?

Repair costs typically range from $150 to $400+, depending on the replacement parts and labor.

When should I call a technician for E03?

Call a technician if the error returns after a reset, or if internal components show signs of damage or the microwave still fails to heat.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!