Breville Microwave Error E13

⚡ Quick Answer: The Breville microwave E13 error indicates a control board internal error, typically accompanied by symptoms such as a flickering or resetting clock/d... ✅ DIY Fixable

What Does Error E13 Mean?

The Breville microwave E13 error indicates a control board internal error, typically accompanied by symptoms such as a flickering or resetting clock/display. This malfunction can lead to the microwave failing to heat food properly and may produce unusual buzzing sounds. It is recommended to try a power reset by unplugging the microwave for at least 5 minutes before plugging it back in. If the issue persists, further inspection or replacement of the control board may be necessary.

Common Symptoms:

  • Clock or display flickers or resets when the error appears

Possible Causes

  • Control board internal error (low)

How to Fix Error E13

DIY Fix Power reset the microwave

  1. Unplug the microwave from the power outlet.
  2. Wait at least 5 minutes to allow internal electronics to discharge.
  3. Plug the microwave back in and power it on.
  4. Check whether the E13 error reappears.

Technician Only Inspect or replace control board

  1. Disconnect power and remove the microwave’s outer cabinet.
  2. Visually inspect the main control board for signs of damage (burn marks, bulging capacitors).
  3. Test relevant low‑voltage power supply and board logic connections.
  4. Replace the control board if confirmed faulty.

Parts needed: Microwave control board / PCB

🛑 When to Call a Pro:
  • If the error persists after basic reset attempts.
  • If there are signs of internal damage (burn marks, smell of burned components).
  • If you are not comfortable opening the microwave’s enclosure.

Next step

Choose the next step for E13

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Microwave parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 900W
component Magnetron
resistance 0.5-1.5 ohms
part_number BMO700SIL-MAG
voltage_rating 120V AC

Common Questions

What does E13 error mean on breville microwave?

E13 indicates a control board internal error, causing the clock/display to flicker or reset.

Can I fix breville microwave E13 error myself?

Yes, you can attempt a power reset by unplugging the microwave for 5 minutes.

How much does it cost to fix E13 error?

The estimated repair cost is moderate to high, varying by model and region.

When should I call a technician for E13?

Call a technician if the error persists after a reset or if there are signs of internal damage.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!