Breville Microwave Error E10
⚡ Quick Answer: The Breville microwave error code E10 indicates a cooling fan or airflow malfunction, which disables cooking functions to prevent overheating. Users m... ✅ DIY Fixable
What Does Error E10 Mean?
The Breville microwave error code E10 indicates a cooling fan or airflow malfunction, which disables cooking functions to prevent overheating. Users may hear buzzing sounds, and the cooling fan may be running or silent. This error commonly arises from blocked vents or a failing cooling fan, necessitating prompt attention to ensure proper operation and safety.
Common Symptoms:
- Microwave displays E10 and beeps
- Cooking function disabled when E10 appears
- Cooling fan may run or may be inaudible
Possible Causes
- Blocked or insufficient airflow around vents (medium)
- Cooling fan failure or obstruction (medium)
How to Fix Error E10
DIY Fix Basic Checks and Airflow Clearance
- Unplug the microwave from power.
- Ensure installation clearance meets specifications in your user manual.
- Clean all rear/side vents of dust and grease using a soft brush or vacuum.
- Plug the microwave back in and test if E10 persists.
Technician Only Inspect and Repair Cooling Fan System
- Disconnect unit from mains power.
- Remove necessary panels to access the cooling fan and motor.
- Check wiring connections to the cooling fan motor.
- Inspect fan blades for damage or obstructions.
- Test fan motor operation and replace the cooling fan motor if defective.
Parts needed: Cooling fan motor, Fan blade assembly, Relevant wiring harnesses
- If E10 persists after basic clearance and cleaning steps
- If user is uncomfortable performing internal component inspection
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Cooling Fan Motor
Moves cooling air around hot cooking components and electronic controls.
- Typical part-only price
- $35 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-75 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Microwave parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 700W |
|---|---|
| component | Magnetron |
| resistance | 0.5-1.5 ohms |
| part_number | BMO700SIL-MAG |
| voltage_rating | 120V AC |
Common Questions
What does E10 error mean on breville microwave?
E10 indicates a cooling fan issue that disables cooking functions to prevent overheating.
Can I fix breville microwave E10 error myself?
Yes, you can clean vents and ensure proper airflow to fix E10.
How much does it cost to fix E10 error?
Repair costs range from $50 to $150, depending on parts and labor.
When should I call a technician for E10?
Call a technician if E10 persists after cleaning or if you're uncomfortable inspecting components.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!