Breville Juicer Error E10

⚡ Quick Answer: The Breville juicer error E10 indicates that the motor has overheated, often resulting in unusual sounds or a flashing display. This may occur due to ... ✅ DIY Fixable

What Does Error E10 Mean?

The Breville juicer error E10 indicates that the motor has overheated, often resulting in unusual sounds or a flashing display. This may occur due to blockages or improper assembly. To resolve the issue, ensure all parts are correctly assembled and the safety locking arm is engaged. Unplug the juicer, wait 10-15 minutes, and then plug it back in to reset any temporary electronic issues. Additionally, inspect and clean all removable parts to eliminate any pulp blockages.

Possible Causes

  • Motor Overload Protection

How to Fix Error E10

DIY Fix General Juicer Troubleshooting (No Specific E10 Info Found)

  1. Ensure the juicer is fully and correctly assembled (all parts in correct orientation and safety locking arm engaged).
  2. Unplug the juicer, wait ~10–15 minutes, then plug back in to clear any temporary electronic issues.
  3. Inspect and clean all removable parts (filter basket, chute, blades) to remove pulp blockage.
  4. Verify the power outlet is working and that the cord has no visible damage.

Technician Only Professional Diagnostic if E10 Persists

  1. Contact Breville authorized service for model‑specific diagnostics, since no official E10 code definition is found in juicer documentation.
  2. Have technician inspect safety switches, control board and internal wiring for faults.

Parts needed: Safety interlock switches, Control board

🛑 When to Call a Pro:
  • If error code persists after reassembly, cleaning, and reset attempts.
  • If the juicer exhibits unusual noises, smoke, burning smell, or does not power on at all.

Technical Specifications

wattage 700W
component Motor Drive Unit
resistance 10-30 ohms
part_number BJE200XL-MOTOR
voltage_rating 120V AC

Common Questions

What does E10 error mean on breville juicer?

E10 error indicates that the motor has overheated, often accompanied by unusual sounds or a flashing display.

Can I fix breville juicer E10 error myself?

Yes, you can try reassembling the juicer, cleaning removable parts, and resetting it by unplugging for 10-15 minutes.

How much does it cost to fix E10 error?

Repair costs vary by region and model but are generally moderate.

When should I call a technician for E10?

Call a technician if the error persists after troubleshooting, or if you notice unusual noises, smoke, or burning smells.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!