Breville Juicer Error E01

⚡ Quick Answer: The Breville juicer error E01 indicates that the motor has entered overload protection mode, which can occur when the juicer is overloaded or encounte... ✅ DIY Fixable

What Does Error E01 Mean?

The Breville juicer error E01 indicates that the motor has entered overload protection mode, which can occur when the juicer is overloaded or encountering a malfunction. This is often accompanied by a humming sound and the display showing E01. To resolve the issue, ensure all components are correctly assembled, the power cord is securely plugged into a functioning outlet, and perform a reset by unplugging the juicer for 15-30 minutes.

Common Symptoms:

  • Error code “E” or “E01” display on juicer when attempting to operate
  • Juicer not running or powering up with error displayed

Possible Causes

  • Motor Assembly
  • Juicing Chamber Blockage
  • Faulty Power Supply

How to Fix Error E01

DIY Fix Basic assembly, power, and safety checks

  1. Ensure all juicer components are fully and correctly assembled, including safety locking arm engaged properly.
  2. Check the power cord is securely plugged into a working outlet and try an alternate outlet.
  3. Turn off and unplug the juicer, wait ~15–30 minutes, then plug it back in to attempt a reset.
  4. Clean juicer components thoroughly (filter basket, blade area, chute) to clear any blockages that could trigger errors.

Technician Only Inspect internal safety switches and motor assembly

  1. Open the juicer casing and inspect safety interlock switches to confirm they are intact and not obstructed.
  2. Check for visible damage to the motor, wiring, or control board connections that could cause error signaling.
  3. Test motor and sensor continuity with appropriate diagnostic tools.

Parts needed: Safety interlock switches, Motor and internal wiring, Control board/sensors

🛑 When to Call a Pro:
  • If the error persists after basic user troubleshooting
  • If internal inspection reveals burned/damaged components
  • If assembly and safety switches seem intact but the erratic error continues

Technical Specifications

wattage 700W
component Motor Assembly
resistance 5-15 ohms
part_number BJE200XL-MOTOR
voltage_rating 120V AC

Common Questions

What does E01 error mean on Breville juicer?

The E01 error indicates the motor is in overload protection mode, often due to excessive load or a malfunction.

Can I fix Breville juicer E01 error myself?

Yes, you can troubleshoot by ensuring proper assembly, checking the power supply, and resetting the juicer.

How much does it cost to fix E01 error?

Repair costs vary widely based on parts that may need replacement; a professional diagnostic is recommended.

When should I call a technician for E01?

Call a technician if the error persists after troubleshooting, or if you find damaged components upon inspection.

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!